牌号简介 About |
---|
NEXT REGRIND PC/ABS MG10-300是一种聚碳酸酯+丙烯腈丁二烯苯乙烯(PC+ABS)材料,。 该产品在北美洲有供货,加工方式为:注射成型。 NEXT REGRIND PC/ABS MG10-300的主要特性有: 环保/绿色 高粘度 加工性能良好 耐冲击 耐热 典型应用领域包括: 电气/电子应用 电气用具 汽车行业 NEXT REGRIND PC/ABS MG10-300 is a Polycarbonate + ABS (PC+ABS) material. It is available in North America for injection molding. Important attributes of NEXT REGRIND PC/ABS MG10-300 are: Eco-Friendly/Green Good Processability Heat Resistant High Viscosity Impact Resistant Typical applications include: Appliances Automotive Electrical/Electronic Applications |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.13 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
3.0 到 5.0 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
610 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
104 | ℃ | ASTM D648 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
110 | ASTM D785 | |
拉伸模量 Tensile modulus |
MPa | ASTM D790 | |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
你敢不敢坐?世界首款3D打印轮椅重磅来袭!
2016-05-23 英国工业设计师Benjamin Hubert和比利时3D打印先驱Materialise合作研发出世界首款3D打印轮椅GO,并将在英国伦敦Clerkenwell上献出“处女秀”。 世界 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |