牌号简介 About |
---|
INDOTHENE HD HD55EF010是一种高密度聚乙烯级产品,采用M/S.BP化学品的工艺知识生产,专门为生产定向单丝产品而配制。分子量分布窄,加工性好,电机负载少,产量高,延伸率和长丝性能好,是一个很好的选择。食品接触应用:该等级符合印度标准IS-10146-1982“与食品、药品和饮用水接触时安全使用的聚乙烯”的要求。它还符合IS:10141:1982中批准的成分积极列表。等级符合FDA法规:CFR标题21,177.1520,烯烃聚合物。 Indothene-HD HD55EF010 is a high density polyethylene grade produced using the process know-how of M/s. BP Chemicals, specially formulated to manufacture oriented monofilament products. It has narrow molecular weight distribution and has very good processability, less motor load and high output combined with very good elongation and filament properties to make it a grade of choice. FOOD CONTACT APPLICATIONS : This grade meets the requirements of Indian Standard IS-10146-1982 on "Polyethylene for its safe use in contact with food stuffs, pharmaceuticals and drinking water". It also conforms to the positive list of constituents as approved in IS:10141:1982. The grade complies with FDA regulation : CFR title 21 , 177.1520, Olefin polymer. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.955 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
1.0 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 2 |
22.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 2 |
15 | % | ASTM D638 |
弯曲模量 Bending modulus 2 |
|||
3.20 mm,注塑成型 3.20 mm, injection molded 2 |
820 | MPa | ASTM D790 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 1 |
【新闻资讯】查看全部
荣盛石化:全力打造“无废工厂” 实现绿色联动发展
2021-05-30 搜料网资讯: 为贯彻落实省《建立全域无废城市建设工作推进机制的通知》和《萧山区无废城市建设工作方案》等文件精神,荣盛石化股份有限公司萧山化纤板块(以下简称萧山荣盛) |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |