牌号简介 About |
---|
聚酰胺6中粘度30%玻璃纤维增强,阻燃剂UL94V0,热稳定,良好的阻燃性也在低厚度,良好的流动性和机械性能,良好的尺寸稳定性。UL94 V0批准所有颜色为0.97 mm。UL746 B已批准。提供:不同颜色。 Polyamide 6 medium viscosity 30% glass fibres reinforced, flame retardant UL94 V0, heat stabilized, good flame proofing also at low thickness, good flow and good mechanical properties, good dimensional stability. UL94 V0 approved all colours at 0.97 mm. UL746 B approved. Available: different colours. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.56 到 1.58 | g/cm³ | ISO 1183 |
收缩率 Shrinkage rate |
|||
TD TD |
0.40 到 0.60 | % | |
MD MD |
0.25 到 0.35 | % | |
吸水率 Water absorption rate |
ISO 62 | ||
23℃,24hr 23℃,24hr |
0.80 | % | ISO 62 |
饱和,23℃ Saturation, 23 ℃ |
6.0 | % | ISO 62 |
Granule Humidity Granule Humidity |
% | 内部方法 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
MPa | ISO 527-1-2 | |
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ISO 527-2/50 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2/50 | |
弯曲模量 Bending modulus 3 |
MPa | ISO 178 | |
弯曲强度 bending strength 3 |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
kJ/m² | ISO 179/1eA | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
23℃ 23℃ |
kJ/m² | ISO 179/1eU | |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature 4 |
|||
1.8 MPa,未退火 1.8 MPa, unannealed 4 |
℃ | ISO 75-2/A | |
连续使用温度 Continuous use temperature |
IEC 60216 | ||
-- -- 5 |
℃ | IEC 60216 | |
-- -- 6 |
℃ | IEC 60216 | |
维卡软化温度 Vicat Softening Temp |
|||
A50 A50 |
℃ | ISO 306/A50 | |
B50 B50 |
℃ | ISO 306 | |
球压测试 Ball pressure test |
|||
170℃ 170℃ |
IEC 60695-10-2 | ||
熔融温度 Melting temperature |
℃ | ISO 11357-3 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:-30~30℃ MD:-30~30℃ |
1/℃ | ASTM D696 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | IEC 60093 | |
相比漏电起痕指数 Compared to the leakage tracing index |
|||
解决方案 A Solution A |
V | IEC 60112 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
1.00 mm 1.00 mm |
UL 94 | ||
灼热丝可燃性指数 Glowing wire flammability index |
|||
1.0 mm 1.0 mm |
℃ | IEC 60695-2-12 | |
灼热丝起燃温度 Igniting temperature of the hot wire |
|||
1 mm 1 mm |
℃ | IEC 60695-2-13 | |
极限氧指数 Extreme oxygen index |
% | ASTM D2863 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 0.039 in/min |
3 120°C/hr |
4 20000 hrs |
5 Short Term |
【新闻资讯】查看全部
上海石化全消光腈纶新品初次量产
2018-06-29 日前,上海石化开发的全消光腈纶短纤新品首次实现量产。第一批35吨3旦该产品经市场认可达到替代进口产品品质要求,打破了国内该领域被日本、泰国等进口产品垄断的局面。 腈纶纤维从光泽度上可分为有光、半消光和全消光。常规腈纶具有较强光泽,而用于服饰、家居等高端面料的腈纶纤维往往需要在生产过程中添加二氧化钛进行消光处理。 此次上海石化开发的全消光腈纶产品二氧化钛含量达到国内半消光产品的6-10倍,明显缓解了纤维外观的闪烁刺眼,使得织物呈现出如天然毛料般柔和的光泽。与此 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |