牌号简介 About |
---|
具有30%玻璃纤维的注塑级,用于表面质量优良的工业零件,例如车辆的外部车门把手、可见天窗框架、烤箱门把手、烤面包机外壳、外部后视镜、车辆的后挡风玻璃雨刮臂和天窗挡风板。原名KR 4040 G6。 Injection molding grade with 30% glass fibers for industrial parts with excellent surface quality, for example external door handles in vehicles, visible sunroof frames, oven door handles, toaster casings, external mirrors, rear screen wiper arms in vehicles and sunroof wind deflectors. Formerly called KR 4040 G6. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.55 | g/cm³ | ISO 1183 |
表观密度 Apparent density |
0.70 到 0.80 | g/cm³ | |
熔体体积流动速率 Melt Volume Rate |
|||
275℃,2.16 kg 275℃,2.16 kg |
15.0 | cm³/10min | ISO 1133 |
收缩率 Shrinkage rate |
ISO 294-4 | ||
TD TD |
0.90 | % | ISO 294-4 |
MD MD |
0.30 | % | ISO 294-4 |
吸水率 Water absorption rate |
ISO 62 | ||
饱和,23℃ Saturation, 23 ℃ |
% | ISO 62 | |
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
% | ISO 62 | |
粘数 Viscosity number 3 |
cm³/g | ISO 307 | |
收缩率 Shrinkage rate 4 |
|||
MD:自由的 MD: Free |
% | ||
TD:自由的 TD: Free |
% | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
MPa | ISO 527-2 | |
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
kJ/m² | ISO 179/1eA | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
ISO 179/1eU | ||
-30℃ -30℃ |
kJ/m² | ISO 179/1eU | |
23℃ 23℃ |
kJ/m² | ISO 179/1eU | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
熔融温度 Melting temperature |
℃ | ISO 11357-3 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:23~80℃ MD:23~80℃ |
1/℃ | ISO 11359-2 | |
比热 specific heat |
J/kg/℃ | ||
温度指数 - at 50% 拉伸强度损失 Temperature index - at 50% tensile strength loss |
IEC 60216 | ||
-- -- 5 |
℃ | IEC 60216 | |
-- -- 6 |
℃ | IEC 60216 | |
最高使用温度 Maximum operating temperature |
|||
short cycle operation short cycle operation |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | IEC 60093 | |
体积电阻率 Volume resistivity |
ohms·cm | IEC 60093 | |
相对电容率 Relative permittivity |
IEC 60250 | ||
100 Hz 100 Hz |
IEC 60250 | ||
1 MHz 1 MHz |
IEC 60250 | ||
耗散因数 Dissipation factor |
IEC 60250 | ||
100 Hz 100 Hz |
IEC 60250 | ||
1 MHz 1 MHz |
IEC 60250 | ||
相比漏电起痕指数 Compared to the leakage tracing index |
|||
解决方案 A Solution A |
V | IEC 60112 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
特殊值 |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
可燃性等级 Flammability level |
IEC 60695-11-10, -20 | ||
0.75 mm 0.75 mm |
|||
1.6 mm 1.6 mm |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 solution 0,005 g/ml Phenole/1,2 Dichlorbenzol 1:1 |
3 plate with film gate 150*150*3 mm³ |
4 5000 h |
5 20000 h |
【新闻资讯】查看全部
废弃塑料原料制造的3D打印笔问世了!
2017-08-14 3D打印技术自打问世以来,便被世界各个行业所看好,但发展了许多年依然是比较小众的技术,仅仅在商业和时尚的领域上小范围的应用。不过,它们在生产的过程中也需要用到塑料原料作为材料,而3D打印笔算是其中的一个比较特殊的一款产品,毕竟它看上去更像玩具,而且操作比较简单、价格上面也不昂贵。 近年来各式各样的3D打印笔在一段时间内集中的出现在市场中,他们有一个共同的特点就是使用塑料长丝作为材质,生产的厂家需要从原料厂商处购买长丝,这是一个隐形的成本。当然,从环保的另一个角度来说,全世界 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |