公司信息及水印
牌号简介 About |
---|
Prime Tuff-X 200 HG具有与我们的Tuff-X 200相同的巨大优势,但在成型前后也具有很高的光泽。成型后,使用Gardner光泽仪在60°角处获得85至90的光泽水平。应用:这种材料组合非常适用于汽车、电动工具、灌溉、流体处理、草坪和花园、电子设备、RV内部和外部零件等应用。加工:Prime Tuff-X 200 HG是一种半晶体材料,与HIPS或ABS等非晶态材料相比,其在热成型过程中的行为有所不同。理想的成型条件;模具温度170-190°F,板材温度320-360°F,零件拆卸温度145-170°F。首选铝温控喷砂工具。如果玻璃珠爆炸,陶瓷工具也能很好地工作。使用Tuff-X时,最好使用石英或陶瓷加热器。有时可以使用Calrod加热器,但不推荐使用燃气炉。表面处理:Prime Tuff-X 200 HG可使用与Prime Tuff-X 200相同的方法制造。也可以使用某些粘合剂进行粘合。Prime Tuff-X 200 HG具有高光泽,如果适当加热,甚至可以在热成型过程中改善。可在光泽度表面修复划痕和擦伤问题。请与Primex塑料公司代表联系,了解有关表面处理、制造或热成型工艺的更多信息。颜色、纹理和功能:Prime Tuff-X 200 HG能够接受任何颜色。基板可以是颜色匹配的,也可以是颜色场。盖和基板都能容纳小于1.5 delta e的压力。Tuff-x 200 Hg的压力表在0.090到0.400英寸之间。宽度可达120“。有几种不同的图案可供选择,但是,通常在需要光滑的高光泽外观时使用。 Prime Tuff-X 200 HG offers the same great benefit as our Tuff-X 200 but also has a very high gloss before and after forming. Using the Gardner Gloss Meter at 60° angle gloss levels of 85 to 90 have been obtained after forming. Applications: This combination of materials is ideal for such applications as automotive, power tools, irrigation, fluid handling, lawn and garden, electronics, RV Interior and exterior parts. Processing: Prime Tuff-X 200 HG is a Semi-crystalline material that behaves differently in the thermoforming process when compared to an amorphous material like HIPS or ABS. Ideal forming conditions; mold temp. 170-190°F, Sheet temp. 320-360°F, part removal temp. 145-170°F. Aluminum temperature controlled grit blasted tools are preferred. Ceramic tools also work well if glass bead blasted. Quartz or ceramic heaters are preferred when working with Tuff-X. Calrod heaters may sometimes be used but gas fired ovens are not recommended. Finishing: Prime Tuff-X 200 HG can be fabricated by using the same method as the Prime Tuff-X 200. It may also be bonded by using certain adhesives. Prime Tuff-X 200 HG has a high gloss that can even improve in the thermoforming process if properly heated. Scratch and mar issues can be repaired on the gloss surface. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: Prime Tuff-X 200 HG is capable of accepting any color. The substrate may be color matched or a field of color. Both the cap and the substrate are capable of holding < 1.5 Delta E. Tuff-X 200 HG is offered in gauges ranging from .090 to .400 in. and widths up to 120". There are several different patterns available, however, typically this product is used when a smooth high-gloss appearance is required. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.06 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
1.1 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
720 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
102 | ℃ | ASTM D648 |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
4.9E-5 | 1/℃ | ASTM D696 |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
De(mold Temperature) De(mold Temperature) |
℃ | ||
模具温度 Mold temperature |
|||
other other |
℃ | ||
Sheet Temperature Sheet Temperature |
℃ | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
贝里:由CleanStream回收技术生产的 rPP,获FDA认证
2022-09-13 扫描上图二维码,可以免费下载 搜料 APP 最近,Berry贝里国际收到了美国食品和药物管理局(FDA)的无异议函(LNO)。LNO证实,由CleanStream工艺生产的消费后回收(PCR) PP可用于食品接触应 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |