牌号简介 About |
---|
Pharmalene® MP 90 PH是一种均聚物高密度聚乙烯(HDPE),通过气相法获得抗氧化剂。其生产是根据良好生产规范(GMP)制造的。窄分子量分布和高密度Pharmalene® MP 90 PH使其非常适合需要高刚性和抗变形性的注塑应用。聚合物在相变阶段具有良好的热稳定性。该产品主要用于制药行业。所用的抗氧化剂添加剂经欧洲药典聚乙烯专著批准,并按其使用。树脂配方是根据多年的经验确定的,不会发生变化。Pharmalene® MP 90 PH是理想的注射成型,以生产帽,封口,小容器和医疗用品需要高硬度和硬度。 Pharmalene MP 90 PH is a homopolymer high density polyethylene (HDPE) with antioxidants obtained by gas phase process. Its production is manufactured according to good manufacturing practices (GMP). The narrow molecular weight distribution and the high density of Pharmalene MP 90 PH make it ideal for injection molding applications where are required high rigidity and resistance to distortion. The polymer during the transformation phase has excellent thermal stability. The main use of the product is in the pharmaceutical industry. The antioxidant additives used are approved by the polyethylene monography of the European Pharmacopoeia and used in compliance with it. The resin formulation is established by years of experience and is not subject to change. Pharmalene MP 90 PH is ideal for injection molding to produce caps, closures, small containers and medical articles requiring high stiffness and hardness. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.960 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
ISO 1133 | ||
190℃,2.16kg 190℃,2.16kg |
7.0 | g/10min | ISO 1133 |
190℃,5.0kg 190℃,5.0kg |
20 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,注塑成型 Shaw's D, injection molding |
69 | ISO 868 | |
拉伸强度 tensile strength |
|||
断裂,注塑成型 Fracture, injection molding |
17.0 | MPa | ISO 527-2 |
屈服,注塑成型 Yield, injection molding |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂,注塑成型 Fracture, injection molding |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
|||
注塑成型 injection molding |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
注塑 Injection molding |
J/m | ISO 180-A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
℃ | ASTM D746 | |
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306/A | |
熔融温度 Melting temperature |
℃ | 内部方法 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
禁塑限塑成为2015年引爆行业话题热词
2016-01-20 核心提示:中国塑料年产量为300万吨,消费量在600万吨以上。塑料袋如果按每年15%的塑料废弃量计算,全世界年塑料废弃量就是1500万吨,中国的年塑料废弃量在100万吨以上,废弃塑料在垃圾中的比例占到 40%,这样大量的废弃塑料作为垃圾被埋在地下,无疑给本来就缺乏的可耕种土地带来更大的压力,因此自2008年6月1日中国限塑大幕揭开。中国的限塑情况只是世界对抗塑料的一大缩影,塑料诞生百年,人们习惯于塑料带来的 中国塑料年产量为300万吨,消费量在600万吨以上。塑料袋如果按每 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |