牌号简介 About |
---|
RA130E是一种高分子量、低熔体流动速率的无规共聚聚丙烯(PP-R)化合物,具有天然有色。该产品适用于单层和多层管道,然后将塑料多层和铝多层管道区分开来。RA130E旨在满足以下标准和法规,以防采用适当的工业制造标准程序,并实施持续质量体系。DIN8078 DIN8077 EN ISO 15874管道系统将显示出高耐久性、无腐蚀性、良好的可焊性、均匀的接头、低水垢倾向和快速简便的安装。 RA130E is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is natural coloured. Applications RA130E is recommended for the production of PP-R pipes and fittings used in Heating Plumbing Domestic water Relining Industrial applications The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer and aluminium multilayer pipes. Specifications RA130E is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented. DIN 8078 DIN 8077 EN ISO 15874 Special features RA130E is a ready made compound in pellet form for the production of pipes and fittings and included is a specially selected additive package to ensure: Enhanced processability Economical pipe production Excellent product consistency High temperature resistance Low influence on taste & odour Good impact strength The pipe system will show high durability, no corrosion, good weldability, homogeneous joints, low tendency to incrustrations and fast and easy installation. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.905 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
0.25 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
900 | MPa | ISO 527-1-2 |
拉伸强度 tensile strength |
|||
屈服 yield |
25.0 | MPa | ISO 527-2/50 |
拉伸应变 Tensile strain |
|||
屈服 yield |
14 | % | ISO 527-2/50 |
弯曲模量 Bending modulus 2 |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179/1eA | ||
-20℃ -20℃ |
kJ/m² | ISO 179/1eA | |
0℃ 0℃ |
kJ/m² | ISO 179/1eA | |
23℃ 23℃ |
kJ/m² | ISO 179/1eA | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
ISO 179/1eU | ||
-20℃ -20℃ |
kJ/m² | ISO 179/1eU | |
0℃ 0℃ |
ISO 179/1eU | ||
23℃ 23℃ |
ISO 179/1eU | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:0~70℃ MD:0~70℃ |
1/℃ | DIN 53752 | |
导热系数 Thermal conductivity coefficient |
W/m/K | DIN 52612 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 0.079 in/min |
【新闻资讯】查看全部
亚洲AN下跌或遭中国扩能抑制
2016-01-04 市场人士12月28日称,中国新增供应将对2016年第一季度亚洲丙烯腈(AN)现货价格上扬趋势产生抑制作用。由于中国市场供应收紧,11月初以来亚洲丙烯腈价格开始持续上涨。据ICIS数据,亚洲丙烯腈价格自11月初以来上涨了8%,12月11日达到980~1180美元/吨(CFR,东北亚)。 市场人士认为,此次亚洲丙烯腈价格的涨势主要归因于上海赛科两套装置短期停工导致市场供应紧张,该公司总计产能达52万吨/年。另外,由于需求疲软,其他亚洲丙烯腈生产商也降低了其工厂负荷,现货市场供应 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |