牌号简介 About |
---|
SI-LINK™ 可交联聚乙烯DFDA-5451 NT是一种乙烯-硅烷共聚物,用于1 kV以下的电力电缆和控制电缆。 DFDA-5451 NT 在加入了DFDB-5480 NT催化剂母料后进行电缆的挤出之后可以发生湿致交联。如果为了防紫外线,需要黑色线缆,则建议添加DFDB-5410 BK 炭黑母料。 由于催化剂和炭黑母料是与DFDA-5451 NT 共聚物分别运输的,所以这些组分在保质期内非常稳定。只有在各组分熔融混配之后接触湿分的条件下才可发生交联反应。 规格 当使用DFDB-5480 NT,或者选用DFDB-5410 BK进行交联后,DFDA-5451 NT 的产品一般都可以满足以下标准中对不高于1 kV 电压的电缆要求: UL 854 ICEA:S-66-524 加拿大标准协会(CSA) RW90 IEC:60502-1 SI-LINK™ Crosslinkable Polyethylene DFDA-5451 NT is an ethylene-silane copolymer developed for use in power cable and control cable applications up to 1 kV. DFDA-5451 NT may be crosslinked after it is extruded with the DFDB-5480 NT catalyst masterbatch by exposing it to moisture after cable manufacture. If a black product is required for UV protection, the addition of DFDB-5410 BK carbon black masterbatch is recommended. Because the catalyst and carbon black masterbatches are shipped separate from the DFDA-5451 NT copolymer, the components are very shelf stable. Crosslinking of the total system only occurs after hot melt mixing of the components and exposure to moisture. Specifications When DFDA-5451 NT is crosslinked with DFDB-5480 NT, and optionally, DFDB-5410 BK, it meets typical 1 kV or less low voltage specifications such as those in: UL 854 ICEA: S-66-524 CSA RW90 IEC: 60502-1 |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.922 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
1.5 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
16.5 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
350 | % | ASTM D638 |
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度保持率 Tensile strength retention rate 2 |
|||
7 days,121℃ 7 days,121℃ 2 |
90 | % | ASTM D638 |
伸长保持率 Elongation retention rate 2 |
|||
7 days,121℃ 7 days,121℃ 2 |
% | ASTM D638 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
高温蠕变 High temperature creep 3 |
|||
15 min,20N/cm²,150℃ 15 min,20N/cm²,150℃ 3 |
% | ICEA T-28-562 | |
热固性 thermosetting 3 |
|||
15 min,0.2 MPa,200℃ 15 min,0.2 MPa,200℃ 3 |
% | IEC 60811-2-1 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电常数 Dielectric constant 2 |
|||
1 kHz 1 kHz 2 |
ASTM D150 | ||
耗散因数 Dissipation factor 2 |
|||
60 Hz 60 Hz 2 |
ASTM D150 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Crosslinked polyethylene properties (95% DFDA-5451 NT, 5% DFDB-5480 NT) |
3 Measured on 14 AWG (2.1 mm²) wire with a 30 mil (0.75 mm) wall after 4 hours curing in 90°C water. Crosslinked polyethylene properties (95% DFDA-5451 NT, 5% DFDB-5480 NT) |
【新闻资讯】查看全部
新疆天业拟募集不超过30亿建设绿色树脂循环经济产业链
2021-05-30 搜料网资讯: 5月26日晚间,新疆天业发布公告称,披露公开发行可转换公司债券预案,此次发行可转债募集资金总额(含发行费用)不超过人民币30亿元(含),具体募集资金数额由公司股东 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |