牌号简介 About |
---|
EPDM 725P是一种低粘度的半结晶级产品,具有易于加工、固化速度快和标准硫固化系统的高固化状态。它设计用于需要低粘度、高绿色强度和高成品硬度的模压和挤压应用。它非常适合高硬度挤压型材和模制品。它也可以被过氧化物固化。主要特点:半结晶中二烯低分子量良好的绿色强度应用:高硬度挤压型材和模制品软管符合美国FDA 21 CFR 177.2600,美国FDA 21 CFR 175.105(仅适用于粘合剂)。有关完整的详细信息,请参考法规 EPDM 725P is a low viscosity semi-crystalline grade which offers ease of processing, fast cure rates, and high states of cure with standard sulfur cure systems. It is designed for molded and extruded applications requiring low viscosity, high green strength, and high finished hardness. It is ideally suited for high hardness extruded profiles and molded goods. It can also be peroxide cured. Main Characteristics: Semi-crystalline Medium diene Low molecular weight Good green strength Applications: High hardness extruded profiles and molded goods Hoses Complies with U.S. FDA 21 CFR 177.2600, U.S. FDA 21 CFR 175.105 (Adhesives only). Consult the regulations for complete details |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.880 | g/cm³ | ASTM D297 |
门尼粘度 Mooney viscosity |
|||
ML 1+4,125℃ ML 1+4,125℃ |
21 到 29 | MU | ASTM D1646 |
乙烯成份 Ethylene composition |
68.0 到 72.0 | wt% | ASTM D3900 |
亚乙基-降冰片烯含量 Ethylidene norbornene content |
4.5 到 5.3 | wt% | ASTM D6047 |
丙烯含量 Propylene content |
25.0 | wt% | ASTM D3900 |
残留转化金属 Residual conversion metal |
ppm | 内部方法 | |
分子量分布 molecular weight distribution |
内部方法 | ||
灰份含量 Ash Content |
% | ASTM D5667 | |
挥发物 Volatiles |
wt% | 内部方法 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
注塑机进口三年下降近30%出口波动坚持在10亿美元以上
2017-03-07 自2015年开始,中国注塑机进口开始出现拐点,进入下降通道,2015、2016两年我国注塑机进口金额累计下降了22083万美元,降幅达到27.2%。 自2014年开始,中国注塑机出口突破10亿美元大关,已 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |