牌号简介 About |
---|
干燥剂MB说明POYAD DS201是一种先进的吸湿器,MB消除了对PE吹塑/铸膜、PE和PP注塑、吹塑、片材/型材挤出等的水分影响,广泛应用于回收和受潮塑料。应用:POYAD DS201的设计是为了便于稀释和均匀混合,因此适用于使用自动加药装置或通过预弯直接添加。同时能吸收自身重量20%的水分,1-8%可使用,推荐3%。在24小时内使用本品混合物,并立即对打开的袋子进行热封,以保持其效率。存放在清洁、干燥、阴凉的地方,避免阳光暴晒不超过6个月。干燥前不要使用打开或损坏的包装。 Desiccant MB Description POYAD DS201 is an advanced moisture absorber MB eliminates moisture effects on PE blown/cast film, PE and PP injection molding, blow molding, sheet/profile extrusion and etc. It's widely used for recycling and damped plastics. Application POYAD DS201 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-bending. Meanwhile it can absorb moisture 20% of its own weight, it can be used from 1 to 8%, however 3% is recommended. Use the mixture of this product within 24 hours and heat seal the opened bags immediately to keep its efficiency. Store in clean, dry and cool place, out of sun exposure not to exceed 6 months. Don't use opened or damaged packages before drying. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.60 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
2.0 | g/10min | ASTM D1238 |
含水率 Moisture content |
< 1000 | ppm | ASTM D644 |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颗粒大小 Particle size |
30.0 到 40.0 | pcs/cm³ | 内部方法 |
离散度 Discrepancy |
OK | 内部方法 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
全球2020年碳纤维市场规模与细分领域需求现状分析
2020-10-23 搜料网资讯: 碳纤维是由有机纤维经过一系列热处理转化而成,含碳量高于90%的无机高性能纤维,是一种力学性能优异的新材料,具有碳材料的固有本性特征,又兼备纺织纤维的柔软可 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |