牌号简介 About |
---|
低密度聚乙烯优异的加工性能。KPOL树脂是专门为注塑成型而开发的低密度聚乙烯。它具有高韧性、良好的柔韧性和合理的抗环境应力开裂性,因此通常用于柔韧性和坚硬物品。应用一般用途的注射成型,通常适用于注射成型应用,常用于盖和封口。 Low Density Polyethylene Excellent Processability Characteristics The KPOL® resin is a low density polyethylene specially, developed for injection molding. It exhibits high toughness with good flexibility and reasonable environmental stress cracking resistance and is therefore typically used for flexibles and tough articles. Applications Injection Molding of general purpose, typically suitable for injection moulding application, frequently used for caps & closures. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.920 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
14 | g/10min | ASTM D1238 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
88.0 | ℃ | ASTM D1525 3 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
40 | ASTM D2240 | |
拉伸强度 tensile strength 2 |
|||
屈服 yield 2 |
10.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
1% 正割 1% secant |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 4, 2.0 in/min |
3 速率 A (50°C/h), 压 力1 (10N) |
【新闻资讯】查看全部
欧盟禁运俄罗斯石油箭在弦上,油价尾盘加速上涨
2022-04-29 WTI 6月原油期货收涨3.3%,报105.36美元/桶,创4月18日以来新高。布伦特6月原油期货收涨2.2%,报107.59美元/桶,创4月21日以来最高,均连涨三日。 最新消息称,只要柏林有时间确保替代供 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |