物性表自定义
公司信息及水印
公司信息及水印
下载中文物性表
下载英文物性表
下载原厂物性表
邮件发送/他人
| 牌号简介 About |
|---|
| TOPAS® 6017S-04是一种环烯烃共聚物 (COC)产品。注塑级，具有较高的热变形温度。 TOPAS® 6017S-04 Product Description TOPAS 6017S-04 is an injection molding grade with a high heat distortion temperature (170°C) and exceptional dimensional stability. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for precision optics, healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has excellent heat resistance to withstand 121°C and 134°C steam and dry heat sterilization protocols, as well as gamma and EtO procedures. Selected Applications Drug delivery Precision componentry Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware High Temperature Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Dimensional stability, high tolerances Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM) TOPAS 6015S-04 - high heat distortion resistance (150°C) for 134°C protocols TOPAS® 6017S-04 TOPAS® 6017S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Africa & Middle East, Asia Pacific, or Latin America. Characteristics include: Flame Rated Copolymer |
产品描述 Product Description
用途：医疗/护理用品;电气/电子应用领域;光学应用;食品包装;瓶子;外科器械;实验室器具;药品包装;管件;
颜色：清晰/透明
加工条件：注射成型 Injection Molding
性能特点： 耐酒精; 蒸汽消毒; 防潮; 耐化学性; 辐射消毒; 高纯度; 食品接触; 加热消毒; 无卤; 防火阻燃等级HB; 尺寸稳定性好; 共聚物; 无BPA; 低萃取物; 耐高温; 无定形的; 透光性好; 环氧乙烷消毒; Good Clarity,Low extract,High purity,Good Dimensional Stability,Steam sterilized,Ethanol tolerance,Halogen free,Food contact compliance,High Heat Resistance,Moisture resistance,No BPA,Radiation disinfection,Copolymer,Solvent resistance,Ethylene oxide disinfection,Heat sterilization,Amorphous,HB
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
1.02 | g/cm³ | ISO 1183 |
|
熔体质量流动速率 Melt Flow Rate |
|||
|
260℃，2.16kg 260℃，2.16kg |
1.4 | g/10min | ISO 1133 |
|
熔体体积流动速率 Melt Volume Rate |
|||
|
260℃，2.16 kg 260℃，2.16 kg |
1.50 | cm³/10min | ISO 1133 |
|
收缩率 Shrinkage rate 3 |
0.50 到 0.70 | % | 内部方法 |
|
吸水率 Water absorption rate |
|||
|
饱和，23℃ Saturation, 23 ℃ |
0.010 | % | ISO 62 |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
拉伸模量 Tensile modulus |
MPa | ISO 527-2/1A/1 | |
|
拉伸强度 tensile strength |
|||
|
屈服 yield |
MPa | ISO 527-2/1A/50 | |
|
拉伸应变 Tensile strain |
|||
|
屈服 yield |
% | ISO 527-2/1A/50 | |
|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
|
23℃ 23℃ |
kJ/m² | ISO 179/1eA | |
|
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
|
23℃ 23℃ |
kJ/m² | ISO 179/1eU | |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
热变形温度 Hot deformation temperature |
|||
|
0.45 MPa，未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
|
玻璃化转变温度 Glass transition temperature |
℃ | ISO 11357-2 | |
|
维卡软化温度 Vicat Softening Temp |
|||
|
B50 B50 |
℃ | ISO 306 | |
|
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
体积电阻率 Volume resistivity |
ohms·cm | IEC 60093 | |
|
相对电容率 Relative permittivity |
IEC 60250 | ||
|
1 kHz 1 kHz |
IEC 60250 | ||
|
10 kHz 10 kHz |
IEC 60250 | ||
|
耗散因数 Dissipation factor |
|||
|
1 GHz 1 GHz |
IEC 60250 | ||
|
相比漏电起痕指数 Compared to the leakage tracing index |
V | IEC 60112 | |
|
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
1.60 mm 1.60 mm |
UL 94 | ||
|
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
折射率 Refractive index |
ISO 489 | ||
|
透光率 Transmittance |
% | ISO 13468-2 | |
| 备注 |
|---|
| 1 一般属性：这些不能被视为规格。 |
| 2 Dependent on processing conditions and part design. |
| 3 10°C/min |
|
【新闻资讯】查看全部 
俄罗斯1-9月聚乙烯进口下降15%
2020-11-04 搜料网资讯： 据ICIS网站10月28日消息 根据MRC的DataScope 报告，1-9月俄罗斯进口聚乙烯（PE）同比下降15%，至47.51万吨。 高密度聚乙烯（HDPE）进口量下降幅度更大，进口量为20.25万 吨，同比 |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。 |
当前牌号已加入对比
支付宝
微信支付