牌号简介 About |
---|
普立万的长纤维热塑性(LFT)化合物是为要求高硬度和良好冲击的应用而配制的,如金属替换或其他结构应用。与标准短纤维产品相比,这些产品具有更高的物理和机械性能。LFT化合物的好处包括改善冲击强度、弹性模量和材料强度,范围从亚环境到高度升高。此外,与传统的高填充短纤维产品相比,LFT化合物在蠕变和疲劳性能方面提供了改进的性能,提高了尺寸稳定性,并表现出优异的表面光洁度。 PolyOne's Long Fiber Thermoplastic (LFT) compounds are formulated for demanding applications which require high stiffness and good impact such as metal replacement or other structural applications. These products exhibit enhanced physical and mechanical properties versus standard short fiber products. Benefits of LFT compounds include improved impact strength, elastic modulus, and material strength across wide temperature ranges from subambient to highly elevated. Furthermore, LFT compounds have been shown to offer improved performance in the areas of creep and fatigue performance, improved dimensional stability, and exhibit an exceptional surface finish when compared to traditional highly filled short fiber products. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.51 | g/cm³ | ISO 1183 |
收缩率 Shrinkage rate |
|||
MD MD |
0.10 到 0.20 | % | ISO 294-4 |
MD MD |
0.080 | % | ASTM D955 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
-- -- |
10900 | MPa | ASTM D638 |
-- -- 2 |
10700 | MPa | ISO 527-2 |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ISO 527-2 | |
断裂 fracture |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture 2 |
% | ISO 527-2 | |
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
-- -- |
MPa | ISO 178 | |
-- -- |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
-- -- |
MPa | ASTM D790 | |
屈服 yield |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
kJ/m² | ISO 179 | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
kJ/m² | ISO 179 | |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
导热系数 Thermal conductivity coefficient |
W/m/K | ASTM E1461 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 1, 0.20 in/min |
【新闻资讯】查看全部
2260双PVC材质儿童拖鞋无害物质超标被召回
2016-12-05 最近,昆山检验检疫局查出一批有害物质超标的儿童吹气拖鞋,鞋厂也是紧急召回了受影响的2260双产品。那么,这些问题儿童拖鞋到底有什么隐患呢? 工作人员告诉记者,由于天气变凉,卖场基本已经不卖这种拖鞋了。在鞋架的角落,记者发现了几种吹气拖鞋,价位在10块钱到60块钱不等。不过,记者发现,这几种拖鞋的标牌上都没有标注所含的化学物质,只是简单地标明成分为PVC材料。最近,因拖鞋帮面饰花、帮面和鞋底的邻苯二甲酸酯含量超标,江苏快鹿鞋业召回了2260双吹气拖鞋。 主治医 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |