牌号简介 About |
---|
Stat-Rite® M2809是一种静电耗散型丙烯酸合金。Stat-Rite® M2809采用专利的stat-rite固有耗散聚合物(idp)合金系统提供清洁、永久的静电放电保护。stat-rite-idp合金提供一致的静态耗散,即使注塑成组件。具有永久静态耗散湿度独立清洁:低排气,低可提取离子耐用:可用于多年应用洁净室配件,拭子手柄,手提袋 Stat-Rite® M2809 is a static dissipative acrylic alloy. Stat-Rite® M2809 utilizes the patented Stat-Rite® inherently dissipative polymer (IDP) alloy system to provide clean, permanent ESD protection. Stat-Rite® IDP alloys provide consistent static dissipation even when injection molded into components. FEATURES Permanently static dissipative Humidity independent Clean: low out-gassing, low extractable ionics Durable: can be used for years APPLICATIONS Cleanroom accessories Swab handles Totes |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.13 | g/cm³ | ASTM D792 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
1450 | MPa | ASTM D638 |
拉伸强度 tensile strength |
|||
屈服 yield |
26.2 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
30 | % | ASTM D638 |
弯曲模量 Bending modulus |
1450 | MPa | ASTM D790 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
静电衰减 Electrostatic attenuation |
|||
1000 V to 10V,50% R.H. 1000 V to 10V,50% R.H. |
sec | CPM | |
表面电阻 Surface resistance |
|||
12% R.H. 12% R.H. |
ohms | ESD S11.11 | |
表面电阻率 Surface resistivity |
|||
50% RH 50% RH |
ohms/sq | ASTM D257 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
离子含量 Ion content |
内部方法 | ||
Cation Na Cation Na |
ng/cm² | 内部方法 | |
Cl Anion Cl Anion 1 |
ng/cm² | 内部方法 | |
NO3 Anion NO3 Anion 1 |
ng/cm² | 内部方法 | |
PO4 Anion PO4 Anion 1 |
ng/cm² | 内部方法 | |
SO4 Anion SO4 Anion 1 |
ng/cm² | 内部方法 | |
Outgassing Outgassing 2 |
内部方法 | ||
MMA MMA |
µg/g | 内部方法 | |
Styrene Styrene |
µg/g | 内部方法 | |
Toluene Toluene |
µg/g | 内部方法 | |
Total Organics Total Organics |
µg/g | 内部方法 | |
填充物 Filler |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Test Method #3010-4 |
3 Test Method #3010-3 |
【新闻资讯】查看全部
限禁塑令推进了聚乳酸塑料开展
2016-01-25 出于环境保护和可持续发展的目的,近年我国各省市禁限塑的步伐不断加快。比如,《吉林省禁止生产销售和提供一次性不可降解塑料购物袋、塑料餐具规定》于今年1月施行,规定全省范围内禁止生产、销售一次性不可降解塑料购物袋、塑料餐具。这使吉林省成为我国首个全面禁塑的省份。业界专家一致认为,禁塑令之下,以聚乳酸为主的生物可降解材料是替代石油基塑料购物袋、塑料餐具的最主要选择。因此,禁塑令会为聚乳酸产业带来较大的市场空间。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |