牌号简介 About |
---|
20-1634是一种低密度双组分硅橡胶。20-1634不到大多数商用封装化合物重量的一半。20-1634采用先进的微气球技术填料。该系统非常适合需要低重量、灵活性、高耐热性和良好电绝缘性能的应用。20-1634不含溶剂或其他有毒物质。因此,它不受管制或被认为对运输有害。特点:低密度柔性深层固化(超过1-2英寸)高工作温度无溶剂优点:不增加产品重量,部件应力低,耐振动,不需要多次浇注,因为放热低,在极端环境应用中保护良好,固化过程中不释放副产品,以及安全处理 20-1634 is a low density, two component silicone elastomer. The 20-1634 is less than half the weight of most commercially available potting and encapsulating compounds. 20-1634 utilizes an advanced micro balloon technology filler. This system is ideal for applications that require low weight, flexibility, high heat resistance, and excellent electrical insulation properties. 20-1634 is formulated without solvents or other toxic materials. It is therefore not regulated or considered hazardous for transportation. Features: Low Density Flexible Deep section curing (beyond 1-2 inches) High operating temperatures Solvent free Benefits: Does not add much weight to products Low stress on components and vibration resistant No need for multiple pours due to low exotherm Good protection in extreme environmental applications No by-products released during cure and safe to handle |
技术参数 Technical Data | |||
---|---|---|---|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
2.0E-4 | 1/℃ | |
导热系数 Thermal conductivity coefficient |
0.16 | W/m/K | |
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ |
30000 | cP | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
工作温度 working temperature |
-65.0 到 235 | ℃ | |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
-- -- 2 |
Clear/Transparent | ||
-- -- 3 |
|||
重量混合比(PBW) Weight Mix Ratio (PBW) |
|||
Part A Part A |
|||
Part B Part B |
|||
密度 Density |
|||
25℃ 25℃ 3 |
g/cm³ | ||
25℃ 25℃ 4 |
g/cm³ | ||
25℃ 25℃ 2 |
g/cm³ | ||
粘度 viscosity |
|||
25℃ 25℃ 2 |
Pa·s | ||
25℃ 25℃ 3 |
Pa·s | ||
固化时间 Curing time |
|||
150℃ 150℃ |
hr | ||
100℃ 100℃ |
hr | ||
65℃ 65℃ |
hr | ||
25℃ 25℃ |
hr | ||
储存稳定性 storage stability 5 |
|||
25 ℃ 25 ℃ 5 |
min | ||
贮藏期限 Storage period |
month | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
|||
拉伸强度 tensile strength |
MPa | ||
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ||
撕裂强度 tear strength |
kN/m | ||
耐电强度 Electrical strength |
kV/mm | ||
相对电容率 Relative permittivity |
|||
100 Hz 100 Hz |
|||
体积电阻率 Volume resistivity |
|||
25 ℃ 25 ℃ |
ohms·cm |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Part B |
3 Part A |
4 Mixed |
5 100 grams |
【新闻资讯】查看全部
截止10月份 中国聚乙烯进口量同比增加12.98%
2020-12-03 搜料网资讯: 据统计,截止到2020年10月份,中国聚乙烯进口量达到了1545.86万吨。预测,与2011年相比,2020年聚乙烯进口总量增幅1126万吨,增速151.3%。中国聚乙烯自2011年以来进口量逐年 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |