牌号简介 About |
---|
热塑性聚烯烃是刚性产品,具有优异的尺寸稳定性和良好的冲击韧性平衡。pureTuff的熔体流动范围广泛(MFR 0.5至100),适用于型材挤压、板材挤压和成型应用。特殊的低温冲击。根据产品硬度,有些产品可延展至-30°C以下。卓越的尺寸稳定性、卓越的刚性、完全可耐候的可回收PPI将根据客户要求定制以适应模具收缩的各种颜色。 Thermoplastic Polyolefins are rigid products with exceptional dimensional stability and good balance of impact and toughness. PureTuff is offered in a wide range of melt flows (MFR 0.5 to 100) suitable for profile extrusion, sheet extrusion and molding applications. Exceptional cold temperature impact. Depending on product rigidity, some products are ductile to as low as -30°C. Excellent dimensional stability Outstanding rigidity Fully Weatherable Recyclable PPI will customize to adjust for mold shrink required by the customer Full range of colors |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.07 | g/cm³ | |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
1.0 | g/10min | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
21.0 | MPa | |
弯曲模量 Bending modulus |
2100 | MPa | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
50 | kJ/m² | |
30℃,局部断裂 30 ℃, localized fracture |
kJ/m² | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
AMMS AMMS |
% | ||
Ductility Ductility |
℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
【深度剖析】聚丙烯和聚乙烯各生产工艺的优劣势对比
2020-12-28 搜料网资讯: 摘要: 聚烯烃产品中应用最多的品种是聚乙烯和聚丙烯。文章叙述了目前这两种烯烃生产技术的主要来源、不同工艺路线的技术 特点。针对生产产品市场份额及工艺成本 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |