牌号简介 About |
---|
Bormed™ RB801CF-01是一种高乙烯含量的无规共聚物。该牌号适用于冷轧无取向铸膜和管式水淬吹膜的生产。该等级也适用于吹塑,包括BFS技术和ISBM(一级工艺),适用于最大2升的安瓿和瓶子。 Bormed RB801CF-01 is a random copolymer with high ethylene content. The current version of Bormed RB801CF-01 has been scheduled for deletion. Please refer to Bormed RB801CF-11 documentation for new projects. In case of questions, please contact either your responsible Borealis Sales Manager and/or Application Development Engineer. This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown films on tubular water quenching process. This grade is also suitable for blow moulding, including BFS technology and ISBM (1-stage process) for ampoules and bottles up to a maximum of 2 litres. Applications Bormed RB801CF-01 has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RB801CF-01 . Medical device packaging Pouches for Continuous Ambulatory Peritoneal Dialysis Parenteral nutrition bags Pouches for IV solutions Secondary packaging Ampoules/small bottles for eye, ear & nose drops Bottles for IV-solutions Bottles/ampoules for injectable solutions This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special features High gloss Low haze High softness High impact strength Low sealing initiation temperature High water vapour barrier Sterilisability by means of water steam Good contact clarity Sterilisabilty with EtO Good gloss Good surface finish |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
1.9 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
弯曲模量 Bending modulus |
750 | MPa | ISO 178 |
摩擦系数 friction coefficient |
> 0.70 | ISO 8295 | |
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
薄膜厚度 film thickness |
|||
测试 test |
50 | µm | |
拉伸模量 Tensile modulus |
ISO 527-3 | ||
MD,50 µm MD,50 µm |
400 | MPa | ISO 527-3 |
TD,50 µm TD,50 µm |
MPa | ISO 527-3 | |
拉伸强度 tensile strength |
ISO 527-3 | ||
MD,屈服,51 µm MD, yield, 51 µ m |
MPa | ISO 527-3 | |
TD,屈服,51 µm TD, yield, 51 µ m |
MPa | ISO 527-3 | |
拉伸应变 Tensile strain |
ISO 527-3 | ||
MD,断裂,50 µm MD, fracture, 50 µ m |
% | ISO 527-3 | |
TD,断裂,50 µm TD, fracture, 50 µ m |
% | ISO 527-3 | |
Instrumented Puncture Test(Total Penetration Energy,50.0 µm) Instrumented Puncture Test(Total Penetration Energy,50.0 µm) |
J/cm | ISO 7765-2 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔融温度 Melting temperature |
℃ | ISO 11357-3 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
光泽度 gloss |
|||
20°,50 µm 20°,50 µm |
ASTM D2457 | ||
雾度 Haze |
|||
50 µm 50 µm |
% | ASTM D1003 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
人民币汇率急跌后央行果断出手:下调外汇存准率意味什么
2022-04-26 在短短一周人民币对美元汇率在在岸、离岸市场双双急跌后,央行果断出手,市场也迅速反弹。 4月25日19时21分左右,中国人民银行发布消息称,为提升金融机构外汇资金运用能力,中 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |