牌号简介 About |
---|
35熔体流动均聚物尖峰聚合物聚丙烯1635是采用Unipol-PP技术制成的,该技术利用气相流化床反应器和高活性催化剂系统,以确保统一的物理性能和批次之间的一致性。本产品适用于低旦单丝纱、挤出涂层和特种铸造压花膜。1635产品提供:优良的颜色和加工稳定性,优良的纤维纺纱特性,抗气体褪色,用于挤压涂层,窄分子量分布,Pinnacle's 1635聚丙烯,由Pinnacle聚合物公司销售,天然,未着色的颗粒形式符合适当的要求。在第176.170(c)节表2中所述的B至H的使用条件下,以及第17节表1所述的III、IV-A、V、VI、VII-A、V、VI、VII-A和IX类食品的使用条件下,可在与第176.170(c)节表1中所述的I、II、IV-B、VII-B和VIII类食品接触的情况下使用CFR第21篇第177部分B子部分第177.1520(c)1.1a.节的规定。6.170(c)在第176.170(c)节表2所述的使用条件d至h下。 35 MELT FLOW HOMOPOLYMER Pinnacle Polymers Polypropylene 1635 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency. This product is intended for low denier per filament yarns; extrusion coating applications; and specialty cast embossed films. The 1635 product provides: Excellent color and processing stability Superior fiber spinning characteristics Resistance to gas fading Excellent component for extrusion coating Narrow Molecular Weight Distribution Pinnacle's 1635 polypropylene as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a. May be used in contact with food types I, II, IV-B, VII-B and VIII described in Table 1 of section 176.170(c), under conditions of use B through H described in table 2 of section 176.170(c) and with food types III, IV-A, V, VI, VII-A, and IX described in Table 1 of section 176.170(c) under conditions of use D through H described in table 2 of section 176.170(c). |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
35 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
|||
MD MD |
1.2 | % | ASTM D955 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 2 |
34.5 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 2 |
10 | % | ASTM D638 |
弯曲模量 Bending modulus 3 |
|||
1% 正割,3.20 mm,注塑成型 1% cut, 3.20 mm, injection molded 3 |
MPa | ASTM D790-A | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch 4 |
|||
23℃,3.2mm,注塑成型 23 ℃, 3.2mm, injection molding 4 |
J/m | ASTM D256 | |
23℃,3.2mm,注塑成型 23 ℃, 3.2mm, injection molding 4 |
kJ/m² | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 1, 2.0 in/min |
3 类型 1, 0.050 in/min |
4 Type I |
【新闻资讯】查看全部
日科化学公司报告:塑料领域的成绩整体处理方案提供商
2016-03-31 公司是国内丙烯酸酯类PVC改性助剂的龙头企业。公司自成立以来一直致力于高效能PVC塑料改性剂的研发、生产和销售。产品涵盖丙烯酸酯类抗冲改性剂、加工助剂、发泡调节剂、彩色共挤料等系列产品,综合产能达到20万吨/年。公司致力于成为塑料领域独一无二的问题整体解决方案提供商,通过为客户提供精准的问题解决方案和完善的售后服务带动产品升级与销售。 我国是塑料助剂生产和消费的大国,但低端产品同质化严重,未来的发展趋势是产品调整的结构和升级换代。我国是全球最大的塑料助剂生产和消费国,塑料助 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |