物性表自定义
公司信息及水印
公司信息及水印
下载中文物性表
下载英文物性表
邮件发送/他人
| 牌号简介 About |
|---|
| Bormed™ LE6607-PH是一种通过高压工艺生产的低密度聚乙烯。用于医药产品软包装和软包装的吹塑。该产品还可用于注塑和吹膜。由Bormed™ LE6607-PH制成的产品可以使用环氧乙烷、γ辐射、电子束辐射或蒸汽进行灭菌。灭菌蒸汽温度最高110°C。应用：医药产品“吹填和密封”安瓿和瓶子的包装 Bormed LE6607-PH is a resin intended for evaluation for use in Healthcare applications. Bormed LE6607-PH is an additive free low density polyethylene typically used in blow moulding articles. Material is characterised with a balanced in flexibility to facilitate to collapsibility of containers. Bottles and ampoules made from Bormed LE6607PH can be steam sterilised at maximum 110 °C. Products made from Bormed LE6607-PH can be sterilised by using ethylene oxide or radiation up to 35 kGy. Applications Bormed LE6607-PH has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed LE6607-PH . Bottles for irrigation solutions Ampoules for injectable solutions Bottles for IV-solutions This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special features No additives |
产品描述 Product Description
用途：瓶子;药品包装;
加工条件：挤出 Extrusion
性能特点： 可回收; 蒸汽消毒; 柔软性好; 抗伽马射线; 辐射消毒; 低密度; 韧性好; 电子束消毒; Good flexibility,Steam sterilized,Renewable resources,Gamma radiation,E-beam disinfection,Low density,Radiation disinfection,Soft
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
0.927 | g/cm³ | ISO 1183 |
|
熔体质量流动速率 Melt Flow Rate |
|||
|
190℃，5.0kg 190℃，5.0kg |
0.30 | g/10min | ISO 1133 |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
邵氏硬度 Shore hardness |
|||
|
邵氏 D Shaw's D |
52 | ISO 868 | |
|
拉伸模量 Tensile modulus |
300 | MPa | ISO 527-1-2 |
|
拉伸强度 tensile strength |
|||
|
屈服 yield |
12.0 | MPa | ISO 527-2/50 |
|
拉伸应变 Tensile strain |
|||
|
断裂 fracture |
% | ISO 527-2/50 | |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
热变形温度 Hot deformation temperature |
|||
|
0.45 MPa，未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
| 备注 |
|---|
| 1 一般属性：这些不能被视为规格。 |
|
【新闻资讯】查看全部 
三房巷子公司拟投资45.15亿元将PTA产能扩至500万吨
2020-10-09 搜料网资讯： 三房巷公告称，全资子公司海伦石化拟投资建设年产320万吨PTA技改扩能项目，该项目预计总投资金额为45.15亿元。 海伦石化现有PTA产能为180万吨。新增产能完工后，该公司 |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。 |
当前牌号已加入对比
支付宝
微信支付