牌号简介 About |
---|
光滑的SIL铂硅树脂在室温下固化,收缩率可忽略不计。光滑的SIL产品具有不同的硬度可供选择,具有极大的通用性,适用于制作任何配置的生产模具,无论大小。这些硅酮具有良好的化学、耐磨性和耐热性。诸如石膏、混凝土、蜡、低熔点金属合金或树脂(聚氨酯、环氧树脂或聚酯)等材料可以在不使用脱模剂的情况下浇铸到这些硅橡胶中。光滑的SIL铂硅酮用于快速成型、蜡铸造(铸造厂和蜡烛制造厂)、建筑修复和混凝土铸造。光滑的SIL940适用于食品相关应用。 Smooth-On Smooth-Sil® Platinum Silicones cure at room temperature with negligible shrinkage. With different hardnesses to choose from, Smooth-Sil® products offer tremendous versatility and are suitable for making production molds of any configuration, large or small. These silicones exhibit good chemical, abrasion and heat resistance. Materials such as plasters, concrete, wax, low-melt metal alloys or resins (urethane, epoxy or polyester) can then be cast into these silicone rubbers without a release agent. Smooth-Sil® Platinum Silicones are used for rapid prototyping, wax casting (foundries and candle makers), architectural restoration and for casting concrete. Smooth-Sil® 940 is suitable for food related applications. (See separate technical bulletin for usage instructions available at www.smooth-on.com). |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.18 | g/cm³ | ASTM D1475 |
特定体积 Specific volume |
0.849 | cm³/g | ASTM D1475 |
收缩率 Shrinkage rate |
|||
MD MD |
< 0.010 | % | ASTM D2566 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
35 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂 fracture |
4.48 | MPa | ASTM D412 |
100% 应变 100% strain |
MPa | ASTM D412 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D412 | |
撕裂强度 tear strength 2 |
kN/m | ASTM D624 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
储存稳定性 storage stability |
min | ASTM D2471 | |
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脱模时间 stripping time |
min | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
混合比 Mixing ratio |
|||
工作温度 working temperature |
℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 B 模具 |
【新闻资讯】查看全部
印度提高17种商品的进口关税
2018-10-19 印度财政部通知,从本月12日起提高17种商品的进口关税。这17种商品包括智能手表、电信设备等。通知显示,智能手表和电信设备的关税从目前的10%提高到20%。 此前印度财政部已经对19种进口商品提高关税。印度财政部决定自9月27日起提高洗衣机、空调、钻石、航空燃油等19种商品的进口关税。其中,空调、冰箱、洗衣机的进口税率从10%提高20%;航空燃油进口税率从零提高至5%。印度财政部表示,在2017―18财年 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |