公司信息及水印
牌号简介 About |
---|
到目前为止,当食品加工厂或其他制造商需要一种检测产品中是否存在异物的方法时,他们别无选择,只能使用高度可见的有色材料作为塑料部件。TECAFORM® AH ID是第一个市售热塑性塑料,可由标准金属检测设备检测,通常用于质量检验。这项技术的进步将降低产品污染的风险,并有助于最大限度地减少重大财务损失的可能性。TECAFORM® AH ID可用于各种食品工业应用中,要求具有良好的强度和韧性、尺寸稳定性、耐磨性和在潮湿环境中工作的能力,且吸湿性小。填料、传送带和成型设备是利用Tecaform特性组合的食品机械。典型应用包括齿轮、耐磨条、衬套、泵零件、模具和辊。 Until now, when a food processor or other manufacturer needed a means of detecting the presence of foreign substances in the product, they had no choice but to use highly visible colored materials for their plastic parts. TECAFORM AH ID is the first commercially available thermoplastic that can be detected by the standard metal detection equipment that is typically used in quality inspection. This advancement in technology will reduce the risk of product contamination, and help minimize the possibility of significant financial loss. TECAFORM™ AH ID can be used in a variety of food industry applications requiring good strength and toughness, dimensional stability, wear resistance and the ability to operate in a wet environment with little moisture absorption. Fillers, conveyors and forming equipment are among the pieces of food machinery that utilize TECAFORM's combination of properties. Typical applications are gears, wear strips, bushings, pump parts, form dies and rollers. Detectable by standard metal detection equipment Excellent machinability Good combination of mechanical properties Resistance to washdown chemicals Good wear and abrasion properties Low moisture absorption Good dimensional stability Good property retention at elevated temperatures Grey in color |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.48 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
ASTM D570 | ||
23℃,24hr 23℃,24hr |
0.22 | % | ASTM D570 |
饱和,23℃ Saturation, 23 ℃ |
0.65 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
23℃ 23℃ |
41 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔融温度 Melting temperature |
165 | ℃ | ASTM D2133 |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
最高使用温度 Maximum operating temperature |
|||
Intermittent Intermittent |
℃ | ||
长期 long-term |
℃ | UL 746B | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ASTM D257 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
M 级 M-level |
ASTM D785 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
屈服,23℃ Yield, 23 ℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
压缩强度 compressive strength |
|||
1% 应变 1% strain |
MPa | ASTM D695 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
波音入华50年:员工6500名,5年交付1千架飞机,王牌机型还没复飞
2022-03-23 东航空难,航空巨头波音(BA.NYSE)再度被推至风口浪尖。 3月21日,中国东航(600115.SH)表示,目前已将公司所有737-800执飞航班的飞机全部控制在地面,空中航班落地后不再执行航班。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |