牌号简介 About |
---|
Shin Etsu Keg-2001-70是一种非常快速固化的液体注射成型硅胶。它作为两种成分提供,以1:1的比例混合,以确保轻松和准确的混合。KEG-2001-70的粘度很低,可以很容易地泵送到大多数注塑系统中。高撕裂强度,高温快速固化,室温下使用寿命长,典型应用O型圈。隔膜。盖帽。橡胶辊。连接器填料。其他电气部件 Shin-Etsu KEG-2001-70 is a very fast cure liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KEG-2001-70 is low enough to allow easy pumping through most injection molding systems. High tear strength Rapid cure time at elevated temperature Long pot life at room temperature Typical Applications O-rings. Diaphragms. Capping. Rubber rollers. Connector packings. Other electrical parts |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.13 | g/cm³ | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
70 | ||
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
10.2 | MPa | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
560 | % | |
撕裂强度 tear strength 2 |
39.1 | kN/m | |
压缩形变 Compression deformation |
|||
180℃,22 hr 180℃,22 hr |
% | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
贮藏期限 Storage period |
|||
32℃ 32℃ |
wk | ||
后固化时间 Post curing time |
|||
200℃ 200℃ |
hr | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
hr |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 B 模具 |
【新闻资讯】查看全部
赢创2017年上半年销售额增长15%达73亿欧元
2017-08-04 2017年上半年,赢创工业集团的销售额增长至73亿欧元。 销售额增长15%,达73亿欧元; 调整后EBITDA上涨8%,至12.5亿欧元; 初步实现收购空气产品公司特种添加剂业务的协同效益。 2017年上半年,赢创工业集团的销售额增长至73亿欧元。与去年同期相比,销售额上涨15%,其中部分原因是首次合并了原美国空气产品公司的特 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |