牌号简介 About |
---|
聚酰胺66中等粘度,20%玻璃纤维增强,UL94V0自熄,非常好的阻燃性,也在低厚度,良好的加工和机械性能。UL94 V0批准所有颜色为0.88 mm。UL746B已批准。可供选择:不同颜色,热稳定(H),释放剂(W),不含PBDE/PBDF。 Polyamide 66 medium viscosity, 20% glass fiber reinforced, UL94 V0 self extinguishing, very good flame proofing also at low thickness, good processing and good mechanical properties. UL94 V0 approved all colors at 0,88 mm. UL746B approved. Available: different colors, heat stabilized (H), release agent (W), and without PBDE/PBDF. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.40 到 1.42 | g/cm³ | ASTM D792, ISO 1183 |
收缩率 Shrinkage rate |
ASTM D955 | ||
MD MD |
0.40 到 0.70 | % | |
TD TD |
0.60 到 0.90 | % | |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
0.75 | % | ASTM D570,ISO 62 |
饱和 saturated |
5.5 | % | ASTM D570 |
饱和,23℃ Saturation, 23 ℃ |
% | ISO 62 | |
Granule Humidity Granule Humidity |
% | 内部方法 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength 1 |
|||
23℃ 23℃ 1 |
kJ/m² | ASTM D256,ISO 179 | |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,3.2mm 23℃,3.2mm |
J/m | ISO 180,ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648,ISO 75-2/A | |
连续使用温度 Continuous use temperature |
|||
-- -- |
℃ | UL 746B | |
-- -- 2 |
℃ | IEC 60216 | |
-- -- 3 |
℃ | IEC 60216 | |
-- -- 4 |
℃ | IEC 60216 | |
-- -- 5 |
℃ | IEC 60216 | |
维卡软化温度 Vicat Softening Temp |
|||
B50 B50 |
℃ | ISO 306/B50, ASTM D1525 6 | |
球压测试 Ball pressure test |
|||
165℃ 165℃ |
VDE 0470 | ||
熔融温度 Melting temperature |
℃ | ASTM D211,ISO 121 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:-30~30℃ MD:-30~30℃ |
1/℃ | ASTM D696 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
|||
2 mm 2 mm |
kV/mm | ASTM D149 | |
相比漏电起痕指数 Compared to the leakage tracing index |
|||
解决方案 A Solution A |
V | IEC 60112 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
0.88 mm 0.88 mm |
|||
1.60 mm 1.60 mm |
|||
3.20 mm 3.20 mm |
|||
灼热丝起燃温度 Igniting temperature of the hot wire |
|||
2 mm 2 mm |
℃ | IEC 60695-2-13 | |
极限氧指数 Extreme oxygen index |
% | ASTM D2863 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638, ISO 527-2 | |
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ASTM D638, ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638, ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ASTM D790, ISO 178 | |
弯曲强度 bending strength |
|||
-- -- |
MPa | ISO 178 | |
断裂 fracture |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 6x4x50 mm |
3 20000 hrs |
4 Heat Stabilized, 20000 hrs |
5 Short Term |
6 Heat Stabilized, Short Term |
7 速率 A (50°C/h), 载荷2 (50N) |
【新闻资讯】查看全部
募资650亿元 先正达拟登陆科创板
2021-07-05 搜料网资讯: 上海证券交易所官网7月2日显示,全球最大的植保公司和第三大种子公司先正达集团股份有限公司科创板上市申请已获受理,拟申请公开发行不超过27.86亿股,计划募集资金 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |