牌号简介 About |
---|
总聚苯乙烯4440H是一种高熔体流动,高冲击聚苯乙烯专门设计(难填充)注塑应用。它的高流动性使其特别适用于大型零件的成型和气体注射技术的应用。应用电视后台办公自动化电子电气 TOTAL POLYSTYRENE 4440H is a high melt flow, high impact polystyrene specially designed for (hard to fill) injection molding applications. Its high fluidity makes it particularly suitable for the molding of large parts and the use of gas injection techniques. Applications TV Back Cover Office Automation Electrical and Electronic |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.04 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
200℃,5.0kg 200℃,5.0kg |
13 | g/10min | ISO 1133 |
螺旋流动长度 Spiral flow length 3 |
55.0 | cm | |
收缩率 Shrinkage rate |
0.40 到 0.70 | % | |
吸水率 Water absorption rate |
|||
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
0.070 | % | ISO 62 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
kJ/m² | ISO 180 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
|||
A50 A50 |
℃ | ISO 306/A50 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
cm/cm/℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | IEC 60093 | |
介电强度 Dielectric strength |
kV/mm | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ISO 2039-2 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ISO 178 |
备注 |
---|
3、熔体温度: 220°C |
【新闻资讯】查看全部
全国节能宣传周 全国低碳日活动将启动
2022-05-31 5月26日,国家发改委、生态环境部、科技部、工业和信息化部等部门联合发出《关于开展2022年全国节能宣传周和全国低碳日活动的通知》。《通知》将2022年全国节能宣传周定为6月13日 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |