牌号简介 About |
---|
POLIGOM是我们的可交联EPDM化合物的商标。POLIGOM GO/10是一种用于电力电缆绝缘和护套的化学交联耐油橡胶。它是一种易于嫁接的化合物,能够在水分和催化剂的存在下反应。我们通常建议使用Mac/100 PSF或Mac/203 HS型催化剂。接枝和催化剂之间的反应:这两种化合物分开储存,在开始挤出之前必须按以下比例混合:接枝/催化剂98,5/1,5认证:HD22.1 EM2,BS7655 RS4 POLIGOM is the trade-mark of our crosslinkable EPDM compound. POLIGOM GO/10 is a chemically crosslinkable OIL RESISTANT rubber for power cables insulation and sheathing. It is a conveniently grafted compound able to react in presence of moisture and of a catalyst. We normally suggest our catalyst type MAC/100 PSF or MAC/203 HS. REACTION BETWEEN GRAFTING AND CATALYST: These two compounds, separately stored, must be mixed before starting extrusion in the ratio: GRAFTING/CATALYST 98,5/1,5 Certify: HD22.1 EM2, BS7655 RS4 |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.950 | g/cm³ | ASTM D792 |
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
空气中拉伸强度的变化率 The rate of change in tensile strength in air |
|||
在空气中断裂时拉伸应力变化 Changes in tensile stress during fracture in air |
|||
70℃,240 hr 70℃,240 hr |
< 15 | % | IEC 60811 |
拉伸强度的变化率 The rate of change in tensile strength |
|||
100℃,24 hr,在IRM 902油中 100 ℃, 24 hours, in IRM 902 oil |
-8.0 | % | IEC 60811 |
100℃,24 hr,在柴油中 100 ℃, 24 hours in diesel 2 |
-29 | % | ISO 1817 |
100℃,70 hr,在SAE 20油中 100 ℃, 70 hr, in SAE 20 oil |
< 30 | % | IEC 60811 |
断裂时拉伸应力变化 Changes in tensile stress during fracture |
|||
100℃,24 hr,在2.5%洗涤剂中(汰渍) 100 ℃, 24 hours, in 2.5% detergent (Tide) 2 |
% | ISO 1817 | |
100℃,24 hr,在IRM 902油中 100 ℃, 24 hours, in IRM 902 oil |
% | IEC 60811 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固性 thermosetting 3 |
IEC 60811 | ||
200℃ 200℃ |
% | IEC 60811 | |
Residual:200℃ Residual:200℃ |
% | IEC 60811 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | BS 6622 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
ASTM D2240 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | IEC 60811 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | IEC 60811 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 20 N/cm² |
3 Test Method : GOST |
【新闻资讯】查看全部
“特性鲜明”的POM资料
2017-11-07 材料导读 :POM是工程塑料种类里个性非常鲜明的产品,具有高硬度、高钢性、高耐磨,抗疲劳等优点,主要用于齿轮,轴承,汽车零部件、机床、仪表内件等起骨架作用的产品。 缺点是冲 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |