牌号简介 About |
---|
EBALTA MG 454在双组分低压装置上进行处理。用砂纸(粒度280)打磨后,表面可涂上商用漆。为了更好地粘合,我们建议使用底漆。应用功能部件汽车领域功能部件EDP领域原型部件EDP领域原型在汽车领域覆盖部件汽车领域覆盖部件EDP领域特性良好冲击强度高刚性玻璃纤维填充机械加工 ebalta MG 454 is processed on a two-component low pressure device. After grinding with a sand paper , grit 280, the surface can be varnished with a commercial lacquer. For better adhesion we recommend the use of a primer coat. Applications Functional parts automotive field Functional parts EDP field Prototyping parts EDP field Prototypes in the automotive field Cladding parts automotive field Cladding parts EDP field Properties good impact strength high rigidity glassfibre filled mechanical processable |
技术参数 Technical Data | |||
---|---|---|---|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
9.0 到 13 | kJ/m² | ISO 179 |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
20℃ 20℃ |
1.00 | g/cm³ | |
固化时间 Curing time |
|||
50℃ 50℃ |
0.083 到 0.25 | hr | |
储存稳定性 storage stability |
|||
20 ℃ 20 ℃ |
1.0 到 1.3 | min | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
75 到 79 | ISO 7619 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
玻璃化转变温度 Glass transition temperature |
℃ | DSC | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | DIN 53752 | |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
后固化时间 Post curing time |
|||
80℃ 80℃ |
hr | ||
120℃ 120℃ |
hr |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
圣莱科特将在K 2022展会上推出一个新品牌的回收塑料添加剂
2022-08-15 作为化学中间体、添加剂、药品和工艺解决方案的全球开发商和制造商,圣莱科特国际集团(SI Group)将于K 2022年推出其新品牌的塑料回收添加剂。 该公司的最新品牌将包括一个创新添 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |