牌号简介 About |
---|
杜邦特氟龙聚四氟乙烯669N X是一种聚四氟乙烯细粉末树脂,主要用于糊料挤出。特氟隆聚四氟乙烯669N X具有特氟隆氟聚合物树脂典型特性的优良组合:无老化特性;几乎对所有工业化学品和溶剂都具有化学惰性;优异的介电性能,频率和温度稳定;韧性和柔韧性;低摩擦系数;不粘合性。特性;可忽略的吸湿性;优异的耐候性;工作温度高达260°C(500°F);在-240°C(-400°F)下的有用特性;中等硬度和高极限延伸率。特氟隆聚四氟乙烯669N X是专为在极低到中等还原比(10:1到500:1)下加工而设计的。特别适用于生产管衬和普通油管。特氟隆聚四氟乙烯669N X符合ASTM D4895-91A,I型,2级,A级的要求。典型应用特氟隆聚四氟乙烯669N X主要用于生产化工行业所用的管衬。它还用于制造机械、化学和电气应用中的管道和不感兴趣的胶带。 DuPont ™ Teflon ® PTFE 669N X is a polytetrafluoroethylene fine powder resin used primarily for paste extrusion. Teflon ® PTFE 669N X offers the excellent combination of properties typical of the Teflon ® fluoropolymer resins: non-aging characteristics; chemical inertness to nearly all industrial chemicals and solvents; exceptional dielectric properties, stable with frequency and temperature; toughness and flexibility; low coefficient of friction; non-stick characteristics; negligible moisture absorption; excellent weather resistance; service temperature up to 260°C (500°F); useful properties at -240 °C (-400 °F); moderate stiffness and high ultimate elongation. Teflon ® PTFE 669N X is designed for processing at very low to medium reduction ratios (10:1 to 500:1). It is particularly suitable for production of pipe liners and general tubing. Teflon ® PTFE 669N X meets the requirements of ASTM D4895-91a, Type I, Grade 2, Class A. Typical Applications Teflon ® PTFE 669N X is mainly used for the production of pipe liners used in the chemical industry. It is also used for making tubing and unsintered tape for mechanical, chemical and electrical applications. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
2.17 | g/cm³ | ASTM D4895 , ISO 12086 |
表观密度 Apparent density |
0.52 | g/cm³ | ASTM D4895 , ISO 12086 |
平均颗粒尺寸 Average particle size |
|||
-- -- |
450 | µm | ASTM D4895 |
-- -- |
450 | µm | ISO 12086 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔融温度 Melting temperature |
ASTM D4895 , ISO 12086 | ||
-- -- 3 |
326 | ℃ | ASTM D4895,ISO 12086 |
-- -- 4 |
℃ | ASTM D4895,ISO 12086 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
挤出压力 - at RR = 100:1 Extrusion pressure - at RR=100:1 |
|||
-- -- |
MPa | ASTM D4895 | |
-- -- |
MPa | ISO 12086 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Second |
3 Initial |
【新闻资讯】查看全部
震雄注塑机占全兴集团全部机台的98%
2016-08-25 全兴集团是全方位汽车配件制造跨国公司。1953年成立于台湾,在中国大陆、马来西亚、越南等地设有据点,子公司共有45家,采用震雄注塑机约120台,占全部拥有机台的98%。 全兴集团紧邻各大车厂提供服务,如福特、三菱、本田、丰田、现代、大众、马自达、斯巴鲁、东风、JCM、海马、罗浮、名爵等皆为全兴集团的重要客户。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |