牌号简介 About |
---|
Boltaron 4050是高冲击、高耐腐蚀的II型PVC板,两面都有工业级光滑饰面。Boltaron 4050适用于热成型,符合ASTM D-1784。标准颜色:中灰色(2103)(原色)定制颜色:根据要求(至少需要订购)规格:.032至2“宽度:48”长度:96“定制尺寸:根据要求标准纹理:工业平滑(两侧)定制纹理:根据要求聚掩模:根据要求建议应用:通风柜和管道机加工零件热成型零件FuME洗涤器酸蚀刻机酸槽和衬里 Boltaron 4050 is high impact, high corrosion resistant, Type II PVC sheet with an industrial smooth finish on both sides. Boltaron 4050 is suitable for thermoforming and conforms to ASTM D-1784. Standard Color: Medium Gray (2103) (stock) Custom Colors: Upon Request (min. order required) Gauges: .032 to 2" Width: 48" Length: 96" Custom Sizes: Upon request Standard Texture: Industrial Smooth (Both Sides) Custom Textures: Upon Request Poly Masking: Upon Request Suggested Applications: Fume Hoods and Ducts Machined Parts Thermoformed Parts Fume Scrubbers Acid Etching Machines Acid Tanks and Linings |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.35 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.056 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
530 到 800 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,退火 1.8 MPa, annealed |
71.1 | ℃ | ASTM D648 |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
3.2E-5 | 1/℃ | ASTM D696 |
比热 specific heat |
J/kg/℃ | ASTM C351 | |
导热系数 Thermal conductivity coefficient |
W/m/K | ASTM C177 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
|||
60 Hz 60 Hz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
60 Hz 60 Hz |
ASTM D150 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
0.80 mm 0.80 mm |
UL 94 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Loss Index(60 Hz) Loss Index(60 Hz) |
ASTM D150 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
ASTM D638 | ||
屈服 yield |
% | ASTM D638 | |
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
屈服 yield |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
剪切强度 shear strength |
MPa | ASTM D732 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
2022第一季度营收增长114% 长鸿高科开启双主业模式
2022-04-28 4月27日晚,长鸿高科发布了2021年年报和2022年一季报。报告显示,2021年,公司实现营业收入17.33亿元,同比增长33.61%;归母净利润1.84亿元,同比下降38.67%。同时披露的2022年一季报显示公 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |