牌号简介 About |
---|
24W930是一种低密度聚乙烯,用于注射加工和配制。它是一种高mfr材料,具有良好的流动性能,允许短周期的tirne。该模制品具有内应力低、刚度好、光泽度高的特点。24W930适用于流动性好、周期短的柔性制品的注塑成型。这种材料特别适用于薄壁产品,如瓶盖和瓶盖、家用产品和玩具。也推荐用于制造高填充化合物。 24W930 is a low-density polyethylene intended for injection rnoulding and compounding. It is a high MFR material, having good flow properties and allowing short cycle tirne. The moulded article is characterised by low degree of built-in stress, good stiffness and high gloss. 24W930 is recommended for injection moulding of flexible products which require good flow properties and short cycle time. The material is especially suitable for thin walled products like caps and closures, household goods and toys. It is also recommended for the manufacturing of highly filled compounds. |
产品描述 Product Description
用途:家用货品;玩具;护罩;薄壁部件;复合;外壳;
加工条件:注射成型 Injection Molding
性能特点: 成型周期快; 流动性高; 低密度; High liquidity,Quick molding cycle,Low density
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.923 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
55 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,4.00 mm,模压成型 Shaw D, 4.00 mm, molded |
47 | ISO 868 | |
拉伸模量 Tensile modulus |
|||
23℃,4 mm,模压成型 23 ℃, 4 mm, molded |
260 | MPa | ISO 527-2 |
拉伸强度 tensile strength |
|||
断裂,4 mm,模压成型 Fracture, 4 mm, molded |
8.60 | MPa | ISO 527-2 |
屈服,4 mm,模压成型 Yield, 4 mm, molded |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂,4 mm,模压成型 Fracture, 4 mm, molded |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
|||
23℃,4 mm,模压成型 23 ℃, 4 mm, molded |
MPa | ISO 178 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306/A | |
熔融温度 Melting temperature 2 |
|||
DSC DSC 2 |
℃ | 内部方法 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 10°C/min |
【新闻资讯】查看全部
中国化学总经理刘家强会见马鞍山市委书记张岳峰
2021-05-30 搜料网资讯: 5月21日,中国化学总经理、党委副书记刘家强会见马鞍山市委书记张岳峰和市委副书记、市长袁方,双方就进一步加强务实合作、推动相关项目落地进行交流沟通。 会后, |