牌号简介 About |
---|
Alcudia PE-004是一种天然交联低密度聚乙烯,专为有机过氧化物交联而设计。该牌号的突出特点是清洁度高、加工性好、交联效率高、机械性能好、表面光洁度好。该等级不含抗氧化剂,因此,有必要添加适当平衡的非染色抗氧化剂和过氧化物,以确保热稳定性和最佳固化水平。Alcudia PE-004通常以八箱、油罐车和厢式货车的形式提供。典型应用中压电缆绝缘。Alcudia PE-004的加工条件取决于所采用的配方和技术,但值得注意的是,该等级适用于120°C-130°C的温度范围。Alcudia PE-004符合以下标准:ISO 1872 PE KHN 18D022;ASTM D 1248 I,A3 E5级。 ALCUDIA® PE-004 is a natural and crosslinkable low density polyethylene specifically designed to be cross-linked by organic peroxide. The outstanding features of this grade are cleanliness, excellent processability, high efficiency of crosslinking, good mechanical properties and smooth surface finish. This grade does not contain antioxidant, therefore, it is necessary to add in proper balance of a non-staining antioxidant and peroxide to ensure thermal stability and optimum cure level. ALCUDIA® PE-004 is normally supplied in octabins, tankers and van-boxes. TYPICAL APPLICATIONS Medium voltage cable insulation. Processing conditions of ALCUDIA® PE-004 are dependent on formulation and technique employed but it is noteworthy that this grade is suitable to use in a temperature range of 120°C - 130°C. ALCUDIA® PE-004 meets the following standards: ISO 1872 PE KHN 18D022; ASTM D 1248 I, A3 Grade E5. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.920 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
2.4 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂 fracture |
14.0 | MPa | ISO 527-2 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
500 | % | ISO 527-2 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
91.0 | ℃ | ISO 306/A |
Hot Set(200℃) Hot Set(200℃) 2 |
% | IEC 60811-2-1 | |
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
机械性能的保留率 Retention rate of mechanical properties 3 |
|||
100℃ 100℃ 3 |
% | ISO 527-2 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength 4 |
kV/mm | IEC 60243-1 | |
介电常数 Dielectric constant |
|||
1 MHz 1 MHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
1 MHz 1 MHz |
ASTM D150 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 20 N/cm², 1.9% Peroxide + 0.2% AO |
3 10 days, 1.9% Peroxide + 0.2% AO |
4 50 Hz |
【新闻资讯】查看全部
亨斯迈推出其新的和改进的现场浇注泡沫
2021-05-18 搜料网资讯: 亨斯迈建筑解决方案公司是高性能、可持续建筑围护结构解决方案的全球领导者,近日宣布推出其新的和改进的现场浇注泡沫。该系列泡沫解决方案最近采用了以HFO为基础 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |