公司信息及水印
牌号简介 About |
---|
Udel P-1700 LCD 聚砜特别适合用于制造多孔膜过滤产品。这类膜通常呈中空纤维形式,但也采用管、板或螺旋缠绕形式。被用于各种应用,如饮用水处理、废水处理、血液处理、制药纯化、气体分离、乳品加工和各类食品加工。 膜生产商可以采用市售偶极非质子传递溶剂,如二甲基乙酰胺( DMAC ) 、二甲基甲酰胺(DMF)和N-甲基吡咯烷酮(NMP)对该树脂进行很好的溶解,在水中完全混溶,并可以很好地控制孔径大小和孔径分布,获得高的膜强度和良好成膜性能。 普通牌号的聚砜含有能从溶液中析出、从而堵塞处理过滤器、限制掺杂溶液寿命的环状二聚物。Udel P-1700 NT LCD是一种专门生产的环状二聚物含量水平较低的树脂,给定重均分子量(Mw)具有较高的数均分子量(Mn),从而导致较高的纤维强度,也即,纤维断裂少、表面缺陷少、废品少。 所得到的膜具有优异的水解稳定性,适应2~13的PH值环境。耐受各种清洗方式,包括盐酸或氢氧化钠。该树脂的Tg为185 ℃,显示出高耐热性。 - 透明: Udel P-1700 NT LCD Udel® P-1700 LCD polysulfone is especially well suited for the fabrication of porous membranes for filtration applications. The membranes are usually in the form of hollow fibers, but tube, plate or spiral wound forms are also used. The membranes are used in a variety of applications, such as potable water treatment, waste water treatment, blood processing, pharmaceutical purification, gas separation, dairy product processing and for processing a variety of food products. This resin offers the membrane producer good solubility in commercially available dipolar aprotic solvents, such as dimethylacetamide (DMAC), dimethylformamide, (DMF) and N-methyl pyrrolidone (NMP), which are completely miscible in water, very good control of pore size and pore size distribution, high membrane strength and good film-forming properties. Typical grades of polysulfone contain a cyclic dimer that can precipitate from solution, plugging the process filters and limiting the life of the dope solutions. Udel® P-1700 NT LCD is specially manufactured to have a lower amount of cyclic dimer. It also has a higher number average molecular weight (Mn) for a given weight average molecular weight (Mw) leading to higher fiber strength, which means fewer fiber breakages, fewer surface defects and fewer rejects. The resultant membranes have excellent hydrolytic stability and are compatible with pHs ranging from 2 to 13. They tolerate a variety of cleaning methods, including hydrochloric acid or sodium hydroxide. The resin has a Tg of 185°C indicating high thermal resistance. Transparent: Udel P-1700 NT LCD |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.24 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
343℃,2.16kg 343℃,2.16kg |
6.5 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
|||
MD MD |
0.70 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.30 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
2480 | MPa | ASTM D638 |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
拉伸冲击强度 Tensile impact strength |
kJ/m² | ASTM D1822 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
ASTM D150 | ||
60 Hz 60 Hz |
ASTM D150 | ||
1 kHz 1 kHz |
ASTM D150 | ||
1 MHz 1 MHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
ASTM D150 | ||
60 Hz 60 Hz |
ASTM D150 | ||
1 kHz 1 kHz |
ASTM D150 | ||
1 MHz 1 MHz |
ASTM D150 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
中科院理化展现了一种海水中可降解资料
2018-11-15 19世纪,塑料诞生了,这被称为人类最伟大的发明之一。但由于白色污染越来越严重,塑料变成了“最糟糕”的发明。据统计,全球每年塑料废弃物约3000万吨,其中超过800万吨的塑料垃圾被直接丢弃或从陆地通过河道、风力最终进入海洋,塑料污染对海洋环境造成的损害远远超过了人们的想象。 前不久,在深圳举行的第一届“率先杯”未来技术创新大赛决赛上,中科院理化所工程塑料国家工程研究中心的团队展示了一种海水中可降解材料,可以有效解决海洋塑料污染问题。该项目也是最终获得优胜奖的30个项目之一。< |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |