牌号简介 About |
---|
LD07520适用于各种工业薄膜应用,需要高冲击强度和良好的降深。LD07520具有均匀性、易加工性和良好的拉伸强度。一般推荐的挤压条件包括:熔融温度范围为310°-350°F(155°-177°C),爆炸比范围为1.8-2.5:1。当使用适当的技术时,以商业价格,可将水位降至1.0密耳(<25微米)以下。具体限制可能适用,请联系您的Osterman销售代表了解更多信息。Osterlene® LD07520符合食品药品监督管理局21 CFR第177.1520节的要求。本法规允许在“…与食品接触的物品或成分中使用该烯烃聚合物。”具体限制可能适用。有关更多信息,请联系您的Osterman销售代表。 LD07520 is designed for a wide variety of industrial film applications where high impac t strength and excellent drawdown are needed. LD07520 exhibits uniformity, ease of processing and good tensile strength. Generally recommended extrusion conditions include a melt temperature range of 310°-350°F (155°-177°C) and a blow-up ratio range of 1.8-2.5:1. Drawdown to gauges below 1.0 mils (<25 microns) is possible at commercial rates when proper techniques are used. Specific limitations may apply, contact your Osterman sales representative for more information. Osterlene LD07520 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.920 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
0.70 | g/10min | ASTM D1238 |
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
割线模量 Secant modulus |
ASTM E111 | ||
1% 正割,MD 1% secant, MD |
179 | MPa | ASTM E111 |
1% 正割,TD 1% secant, TD |
221 | MPa | ASTM E111 |
拉伸强度 tensile strength |
ASTM D882 | ||
MD,断裂 MD, fracture |
23.4 | MPa | ASTM D882 |
TD,断裂 TD, fracture |
MPa | ASTM D882 | |
拉伸应变 Tensile strain |
ASTM D882 | ||
MD,断裂 MD, fracture |
% | ASTM D882 | |
TD,断裂 TD, fracture |
% | ASTM D882 | |
落锤冲击 Drop hammer impact 2 |
g | ASTM D1709 | |
埃尔曼多夫抗撕强度 Elmandorf tear strength |
ASTM D1922 | ||
MD MD |
g | ASTM D1922 | |
TD TD |
g | ASTM D1922 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature 2 |
℃ | ASTM D746 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
ASTM D638 | ||
屈服 yield |
MPa | ASTM D638 | |
断裂 fracture |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
ASTM D638 | ||
屈服 yield |
% | ASTM D638 | |
断裂 fracture |
% | ASTM D638 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 F50 |
【新闻资讯】查看全部
C-TOUCH & DISPLAY 2017招展完毕,2018展位预订炽热开启
2017-10-24 C-TOUCH DISPLAY 2017招展圆满结束,2018展位预订火热开启! C - TOUCH DISPLAY 2017展位招商工作已全面结束 ! 还剩36天,2017深圳国际全触与显示展将于11月24-26日在深圳会展中心盛大开幕。在即 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |