牌号简介 About |
---|
Clearflex DFH 20是采用Unipol气相技术生产的线性低密度聚乙烯树脂-丁烯共聚单体。Clearflex DFH 20具有典型的宽分子量分布,具有良好的加工性能和良好的机械特性。主要应用Clearflex DFH 20主要用于生产微灌管、耐用软管和管道、挤压型材以及通过注射成型的配件。室外使用时,需要添加抗紫外线的添加剂,即使长时间暴露在阳光下,也能保持良好的性能。 Clearflex DFH 20 is a Linear Low Density Polyethylene Resin butene comonomer produced by Unipol gas phase technology. Clearflex DFH 20 exhibits a typical wide molecular weights distribution which gives an excellent processability together with good mechanical characteristics. Main Applications Clearflex DFH 20 is mainly designed for the production of micro-irrigation tubes, durable hoses and pipes, extruded profiles and for the production by injection molding of fittings. The outdoor use, requires the additivation with anti-UV, to maintain excellent performance even after prolonged periods of exposure to sunlight. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.920 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
0.60 | g/10min | ISO 1133 |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) |
> 500 | hr | ASTM D1693B |
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
撕裂强度 tear strength 2 |
|||
MD,25 µm MD,25 µm |
10.0 | kN/m | |
TD,25 µm TD,25 µm |
255.0 | kN/m | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
℃ | ASTM D746 | |
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306/A | |
熔融温度 Melting temperature |
℃ | 内部方法 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ISO 868 | ||
拉伸强度 tensile strength |
ISO 527-2 | ||
屈服,模压成型 Yield, molding |
MPa | ISO 527-2 | |
断裂,模压成型 Fracture, molded |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂,模压成型 Fracture, molded |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
|||
模压成型 Compression Molding |
MPa | ISO 178 |
备注 |
---|
2 Blown Film |
【新闻资讯】查看全部
西澳工程师着手将废弃PTE塑料转化为3D打印线材
2017-11-07 一个令人吃惊的事实是,西澳大利亚的塑料回收并没有在当地进行,该地的废弃塑料被销售和运输到“国际废料市场”进行处理。面对这一情况,西澳工程师Darren Lomman决定着手在珀斯建一个塑料回收工厂,将废弃的PTE塑料转化为3D打印线材,这也将是西澳的第一座塑料回收工厂。这个项目的名字为Greenbatch。 Lomman表示,大多数废弃塑料被燃烧发电,这不仅污染了环境,也浪费了宝贵的资源。通过将它们转化为3D打印线材,塑料回收成为一个更环境友好、更可持续的过程。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |