牌号简介 About |
---|
当橡胶部件需要耐油或耐溶剂性能时,建议使用尼泊尔丁腈弹性体(NBR)。尼泊尔丁腈弹性体有广泛的丙烯腈含量范围,以确保在各种条件下的最佳性能。随着丙烯腈含量的增加,燃料、油和溶剂的耐性提高;随着丁二烯含量的增加,低温柔韧性和弹性提高。为了获得广泛的硬度和其他基本性能,可以将Nipol弹性体混合以获得最佳性能。尼泊尔弹性体是最好的价值,除了最苛刻的油,热和化学应用,可在粉末,面包屑,液体和捆形式。尼泊尔丁腈弹性体特别适用于热塑性塑料和热固性改性;它们也用作涂料和粘合剂的添加剂。用于腈、氯丁橡胶和聚氯乙烯化合物的特殊性能/应用增塑剂。改善编织和流程。也可用于塑料溶胶和酚醛树脂。 NIPOL® NITRILE ELASTOMERS (NBR) are recommended when oil or solvent resistance is needed for the proper functioning of rubber parts. Nipol nitrile elastomers are available in a broad range of acrylonitrile content to ensure optimal performance in a variety of conditions. As acrylonitrile content is increased, fuel, oil and solvent resistance improve; low-temperature flexibility and resiliency are improved as butadiene content increases. To obtain a broad spectrum of hardnesses and other essential properties, Nipol elastomers can be blended to achieve optimal performance. Nipol elastomers are the best value for all but the most demanding oil, heat and chemical applications and are available in powder, crumb, liquid and bale forms. Nipol nitrile elastomers are especially suitable for thermoplastics and thermoset modification; they are also used as additives in coatings and adhesives. Special Properties/Applications Plasticizer used for nitrile, neoprene and PVC compounds. Improves knitting and flow. May also be used in plastisols and phenolic resins. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.958 | g/cm³ | |
ACN Content ACN Content |
28 | % | |
粘度 viscosity |
20.0 到 30.0 | Pa·s |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
2016年11月中国钛白粉出口环比增长15.79%
2016-12-27 根据海关总署提供统计数据,2016年11月我国钛白粉进口量为18531.695吨,同比增长15.77%,环比增长42.24%,进口前三名地区为台湾、澳大利亚、美国,2016年1-11月钛白粉总进口167978.87吨,同比减少11.68%。2016年11月我国钛白粉出口63243.457吨,同比增长59.15%,环比增长15.79%,其中出口前三名国家为印度、美国、韩国,出口前三名地区为四川、山东、河南,2016年1-11月钛白粉总出口658464.006吨,同比增长36.38%。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |