牌号简介 About |
---|
46GB012是一种高密度聚乙烯(HDPE)吹塑级。它具有较高的冲击强度,优异的ESCR和双峰分子量分布,易于加工。46GB012可以很容易地在大多数高密度聚乙烯吹塑生产线上加工。 46GB012 is a High Density Polyethylene (HDPE) blow moulding grade. It possesses high impact strength, outstanding ESCR and bimodal molecular weight distribution for easy processability. 46GB012 can be readily processed on most HDPE blow moulding lines. |
产品描述 Product Description
用途:容器;吹塑成型应用;
加工条件:吹塑成型
性能特点: 双峰分子量分布; 冲击性能好; 食品接触; 易加工; Excellent Processability,High impact resistance,Food contact compliance,Bimodal molecular weight distribution
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.946 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,5.0kg 190℃,5.0kg |
1.2 | g/10min | ASTM D1238 |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) |
|||
注塑成型,F50 Injection molding, F50 |
> 600 | hr | ASTM D1693 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服,注塑成型 Yield, injection molding |
23.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
屈服,注塑成型 Yield, injection molding |
12 | % | ASTM D638 |
弯曲模量 Bending modulus |
|||
注塑成型 injection molding |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
注塑 Injection molding |
ASTM D256 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
中国化学召开2020年度业绩说明会
2021-05-03 搜料网资讯: 4月29日下午,中国化学工程股份有限公司在京召开2020年度业绩说明会。 中国化学 董事、总经理刘家强,总会计师、总法律顾问刘东进出席会议并讲话,董事会秘书李涛主 |