牌号简介 About |
---|
食品容器、覆盖物和一般用途的高密度聚乙烯树脂(HDPE)ESCR可加工性和硬度符合:美国FDA 21 CFR 177.1520(c)3.2A美国FDA-DMF加拿大HPFB无异议(有限制)有关完整详细信息,请咨询法规。DOWLEX™ IP 41聚乙烯树脂是一种改进的加工高密度树脂,旨在为食品容器、覆膜和其他一般用途应用提供卓越的加工性和刚性。DOWLEX™ IP 41树脂通过专利的、优化的分子量分布和稍高的密度来平衡峰值分子量,以获得优异的刚性。该树脂在各种加工条件下表现出良好的加工性能。 High Density Polyethylene Resin (HDPE) For food containers, overcaps and general purpose applications ESCR processability and rigidity Complies with: U.S. FDA 21 CFR 177.1520 (c) 3.2a U.S. FDA-DMF Canadian HPFB No Objection (With Limitations) Consult the regulations for complete details. DOWLEX™ IP 41 Polyethylene Resin is an Improved Processing high density resin designed to offer excellent processability and rigidity for food containers, overcaps and other general purpose applications. DOWLEX IP 41 resin balances peak molecular weight with a proprietary, optimized molecular weight distribution and a slightly higher density for excellent rigidity. This resin has demonstrated excellent processability over a wide range of processing conditions. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.956 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
42 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸冲击强度 Tensile impact strength 3 |
63.0 | kJ/m² | ASTM D1822 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
65.0 | ℃ | ASTM D648 |
脆化温度 Embrittlement temperature |
-20.0 | ℃ | ASTM D746 |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 | |
熔融温度 Melting temperature |
|||
DSC DSC |
℃ | 内部方法 | |
结晶峰温度 Crystallization peak temperature |
|||
DSC DSC |
℃ | 内部方法 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
ASTM D638 | ||
屈服 yield |
MPa | ASTM D638 | |
断裂 fracture |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
ASTM D638 | ||
屈服 yield |
% | ASTM D638 | |
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
2% 正割 2% secant |
MPa | ASTM D790-B |
备注 |
---|
1 With limitations |
2 一般属性:这些不能被视为规格。 |
3 类型 S |
【新闻资讯】查看全部 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |