![](/page/pc/images/result/icon-datasheet-right-ad-none.png)
![](/page/pc/images/result/icon-datasheet-right-ad-none.png)
![](/page/pc/images/result/downloads-img2.png)
公司信息及水印
![](/page/pc/images/result/downloads-img4.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img3.png)
牌号简介 About |
---|
Resinoid 1345是一种玻璃增强的两步酚醛模塑料。它是专为塑模电机换向器开发的,在高温下,在离心负载下,换向器的性能是至关重要的。这种材料来自造粒,并适用于注射,转移或压缩成型。 Resinoid 1345 is a glass reinforced, two-step phenolic molding compound. It was specifically developed for molded electric motor commutators where performance for prolonged periods at elevated temperatures while under centrifugal loads is critical. This material comes in pelletized from and is suitable for injection, transfer or compression molding. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
2.00 | g/cm³ | ASTM D792,ISO 1183 |
紧缩率 Shrinkage rate |
2.5 | ASTM D1895 | |
收缩率 Shrinkage |
|||
MD MD |
0.10 | % | ASTM D955 |
MD MD |
0.10 | % | ISO 294-4 |
吸水率 Water Absorption |
|||
24hr 24hr |
0.10 | % | ASTM D570 |
23℃,24hr 23℃,24hr |
% | ISO 62 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Izod Notched Impact strength |
|||
-- -- |
J/m | ASTM D256-A | |
-- -- |
kJ/m² | ISO 180-2A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 HDT |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648,ISO 75-2/A | |
线性热膨胀系数 Coeff.of linear therm expansion |
|||
MD MD |
1/℃ | ASTM D696,ISO 11359-2 | |
电气性能 ELECTRICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | ASTM D149,IEC 60243-1 | |
耐电弧性 Arc resistance |
sec | ASTM D495 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame Class Rating |
UL 94 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
E 级 E-level |
ASTM D785 | ||
M 级 M-level |
ASTM D785 | ||
M 级 M-level |
ISO 2039-2 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
屈服 yield |
MPa | ISO 527-2 | |
弯曲模量 Flexural Modulus |
|||
-- -- |
MPa | ASTM D790 | |
-- -- |
MPa | ISO 178 | |
弯曲强度 Flexural Strength |
|||
-- -- |
MPa | ASTM D790 | |
-- -- |
MPa | ISO 178 | |
压缩强度 compressive strength |
MPa | ASTM D695,ISO 604 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部 ![]()
大化所实现电还原一氧化碳直接制乙烯!
2021-03-21 搜料网资讯: 近日,大连化物所邓德会研究员团队成功实现电催化一氧化碳高选择性直接制备乙烯,为高选择性、低能耗地通过一氧化碳制备乙烯提供了新思路。 乙烯是重要的基本有机 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |