牌号简介 About |
---|
BG383MO是一种用于注塑成型的聚丙烯共聚物。该等级具有高冲击强度和硬度的最佳组合。该品位采用了钻孔成核技术(BNT),通过缩短循环时间来提高生产率。BNT结合良好的刚度和良好的流动性能,为壁厚减薄创造了巨大的潜力。用这种级别的产品具有优良的抗静电性能和良好的脱模性。与所有BNT等级一样,产品与不同的着色剂具有良好的尺寸一致性。 BG383MO is a polypropylene copolymer intended for injection moulding.This grade is characterized by optimum combination of high impact strength and stiffness. This grade uses Borealis Nucleation Technology (BNT) to increase productivity by cycle time reduction. BNT in combination with excellent stiffness and good flow properties creates a high potential for wall-thickness reduction. Products moulded with this grade exhibit excellent antistatic performance and very good mould release. As with all BNT grades, products exhibit excellent dimensional consistency with different colorants. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.905 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
33 | g/10min | ISO 1133 |
收缩率 Shrinkage rate |
1.0 to 2.0 | % | ISO 294-4 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
1400 | MPa | ISO 527-2/50 |
拉伸强度 tensile strength |
|||
屈服 yield |
25.0 | MPa | ISO 527-2/50 |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ISO 527-2/50 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179/1eA | ||
-20℃,注塑成型 -20 ℃, injection molding |
kJ/m² | ISO 179/1eA | |
23℃,注塑成型 23 ℃, injection molding |
kJ/m² | ISO 179/1eA | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
外盘休市群龙无首 PP塑料争做“领头羊”
2021-04-11 搜料网资讯: 今日外盘休市,内盘品种大多止跌回升,昨夜原油V型反转,今日PP和塑料高开震荡走高,棕榈回归强势,双粕涨幅缩小,铁矿跌幅缩小,目前甲醇和玻璃领跌。截至收盘 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |