牌号简介 About |
---|
Kraton D1118 E是一种基于苯乙烯和丁二烯的透明二嵌段共聚物,聚苯乙烯含量为33%。它由欧洲提供,其物理形式如下所示。D1118 ET-以多孔颗粒形式提供,用滑石粉D1118 ES-以多孔颗粒形式提供,用无定形硅石D1118 ESM-以粉末形式提供,用无定形硅石Kraton D1118 E对沥青进行改性。也可用于配制粘合剂、密封剂和涂料,以及聚合物的改性。 Kraton D1118 E is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from Europe in the physical form identified below. Kraton D1118 ET - supplied as porous pellets dusted with talc Kraton D1118 ES - supplied as porous pellets dusted with amorphous silica Kraton D1118 ESM - supplied as powder dusted with amorphous silica Kraton D1118 ETM - supplied as powder dusted with talc for the North American market Kraton D1118 E is used for modification of bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.940 | g/cm³ | ISO 2781 |
Antioxidant Additive Antioxidant Additive 2 |
0.15 到 0.40 | % | 内部方法 |
Extractables Extractables |
< 1.0 | % | 内部方法 |
聚苯乙烯含量 Polystyrene content |
31 到 35 | % | 内部方法 |
灰份含量 Ash Content |
|||
ES ES |
0.15 到 0.40 | % | ISO 247 |
ESM ESM |
% | 内部方法 | |
ET ET |
% | 内部方法 | |
挥发物 Volatiles |
% | 内部方法 | |
溶液粘度 Solution viscosity |
|||
25%甲苯,25℃ 25% toluene, 25 ℃ |
mPa·s | 内部方法 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,10 秒 Shore A, 10 seconds |
ISO 868 | ||
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ISO 37 | |
300% 应变 300% strain |
MPa | ISO 37 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 37 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Diblock Content Diblock Content |
% |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Non-staining phenolic antioxidant |
【新闻资讯】查看全部
福建150万吨聚丙烯项目加快补齐国内产能短板
2016-11-25 中国软包装集团中景石化年产150万吨多元共聚聚丙烯项目在福州江阴启动建设。作为当前世界上单产产能最大的聚丙烯装置之一,该项目将有效满足我国高品质工程塑料原材料需求,加快补齐国内产能短板。 该项目总投资50亿元,预计于2018年投产,年产值180亿元,所生产的多元共聚聚丙烯产品将广泛应用于汽车、航空等高端装备产业。 据悉,作为全球最大的聚丙烯生产国和消费国,我国国内当前生产的聚丙烯以通用料为主,大量高端专用料仍主要依赖进口,其中抗冲击性能较强的共聚聚丙烯年进口 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |