牌号简介 About |
---|
Pearlbond™ 120是一种线性聚己内酯基聚氨酯,以白色小颗粒形式提供,结合了极高的结晶速率和极高的热塑性水平。用于热熔胶。应用Pearlbond™ 120主要用于纺织涂层,通过挤压或烧结工艺制造鞋头加强件(鞋头和柜台)。Pearlbond™ 120可用于制造热密封织物(热粘合),通过诸如散射或点涂层(粉末或浆糊)等涂层工艺获得。在所有情况下,产品都是先通过低温研磨磨成粉末。粉末的粒径将取决于要使用的应用技术。 Pearlbond® 120 is a linear, polycaprolactone-based polyurethane, supplied in form of small white granules, which combines an extremely high crystallization rate with a very high thermoplasticity level. It is used for Hot Melt adhesives. APPLICATIONS Pearlbond® 120 is mainly used for textile coating for making shoe-stiffeners (toe puffs & counters), by extrusion or sintering process. Pearlbond® 120 can be used for making heat-sealable fabrics (thermobonding), obtained by coating processes such as scattering or dot-coating (powder or paste). In all cases, the product is previously ground into powder, by cryogenic grinding. The particle size of the powder will depend on the application technique to be used. |
技术参数 Technical Data | |||
---|---|---|---|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
54 | ISO 868 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔融温度 Melting temperature |
64.0 到 68.0 | ℃ | 内部方法 |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
结晶速率 Crystallization rate |
Very High | 内部方法 | |
软化范围 Softening range |
55 到 60 | ℃ | 内部方法 |
Thermoplasticity Thermoplasticity |
Very High | 内部方法 | |
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
20℃ 20℃ |
g/cm³ | ISO 2781 | |
熔体质量流动速率 Melt Flow Rate |
|||
170℃,2.16kg 170℃,2.16kg |
g/10min | ISO 1133 | |
熔体表观粘度 Apparent viscosity of melt 2 |
|||
160℃ 160℃ 2 |
Pa·s | ISO 1133 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.16 kg |
【新闻资讯】查看全部
台塑美国暂时关闭其位于德州的LDPE装置
2021-02-01 搜料网资讯: 知情人士1月29日表示,石化生产商台塑美国公司已暂时关闭其位于得克萨斯州Point Comfort的LDPE装置,预计将于本周末重启。 1月29日,台塑没有回应置评请求。 消息人士称, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |