牌号简介 About |
---|
BMC 604成型化合物是一种低成本的矿物填充玻璃纤维增强聚酯化合物,适用于压缩、转移和填充器注射成型。它是一种通用材料,具有中等的冲击强度和良好的综合电气性能。典型应用包括滑环、异径管和刷握。BMC 604模塑料是在工业颜色范围内以挤压形式生产的。它有12英寸长的原木或特定重量的预切段塞,直径为1“至2½”。在这个范围内,较小的直径作为多个挤压件提供,重量公差为正负5%,最大正负15克。 BMC 604 molding compound is a low-cost, mineral filled glass-fiber-reinforced polyester compound suitable for compression, transfer and stuffer injection molding. It is a general purpose material with medium impact strength and good overall electrical properties. Typical applications include slip rings, cummutators and brush holders. BMC 604 molding compound is produced in extruded form in a range on industrial colors. It is available in logs up to 12 inches in length or as precut slugs, of specific weight, in diameters 1" to 2 ½" . Within this range, smaller diameters are supplied as multiple extrusion and weight tolerances are plus or minus 5 %, up to a maximum of plus or minus 15 grams. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
2.06 | g/cm³ | |
吸水率 Water absorption rate |
0.14 | % | |
收缩率 Shrinkage rate |
0.30 - 0.40 | % | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
>= 260 | ℃ | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
耗散因数 Dissipation factor |
|||
绝缘强度 Insulation strength |
13.4 | KV/mm | |
耐电弧性 Arc resistance |
sec | ||
相比漏电起痕指数 Compared to the leakage tracing index |
V | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
6.35 mm 6.35 mm |
UL-94 | ||
3.17 mm 3.17 mm |
UL-94 | ||
1.59 mm 1.59 mm |
UL-94 | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
|||
拉伸强度 tensile strength |
MPa | ||
弯曲强度 bending strength |
MPa | ||
压缩强度 compressive strength |
MPa |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 方法A(短时间) |
【新闻资讯】查看全部
首次!镇海炼化丁二烯出口产品国外市场
2022-05-09 近日,镇海炼化 2000 吨丁二烯由货轮装载驶离游山码头 14 号泊位,开始运往韩国丽水港口,这标志着镇海炼化丁二烯产品首次出口国外市场。 丁二烯是乙烯裂解装置下游产品,主要用 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |