公司信息及水印
牌号简介 About |
---|
Tecast铸造尼龙有多种等级,具有良好的机械性能、优异的轴承和磨损特性以及铸造工艺的大尺寸能力。它的抗疲劳性、噪音阻尼能力、耐腐蚀性和重量轻,使Tecast成为轴承、齿轮、滑轮和链轮等金属更换应用的理想选择。与铁、铝、黄铜和青铜等金属相比,Tecast的重量只有青铜的八分之一,更易于操作和维护,在工业磨损应用中,它通常会取代这些金属。由于其优越的性能,Tecast通常替代的其他材料是层压酚醛塑料、弹性体和木材。Tecast具有优异的耐磨性,延长了部件寿命,降低了维护成本。它的配方很容易在杆、板和管中获得。非标准形状,如环、盘和块,可以小批量经济生产,交货期短。定制零件可以用相对便宜的工具铸造成尺寸或接近净形状。其独特的强度、耐磨性、韧性、可加工性和耐腐蚀性组合使Tecast铸造尼龙成为轴承、止推垫圈、衬套、耐磨垫、带轮、滚子、齿轮、链轮和车轮的理想选择。Tecast通常用于建筑设备、材料处理系统、游乐场游乐设施、纸浆和纸张处理设备、钢厂和工业设备。一种二硫化钼填充铸造的6型尼龙,由于其优越的强度和硬度而用于一般轴承和磨损应用。 TECAST™ cast nylon, available in a variety of grades, offers a combination of good mechanical properties, excellent bearing and wear characteristics, and the large-size capabilities of the casting process. Its fatigue resistance, noise damping ability, corrosion resistance, and light weight make TECAST™ ideal for metal replacement applications, such as bearings, gears, sheaves, and sprockets. At one-eighth the weight of bronze, TECAST™ is easier to handle and maintain than metals such as iron, aluminum, brass, and bronze, which it typically replaces in industrial wear applications. Other materials that TECAST™ commonly replaces because of its superior performance are laminated phenolics, elastomers, and wood. TECAST™ has excellent wear and abrasion resistance, resulting in extended component life and lower maintenance cost. Its formulations are readily available in rod, plate, and tube. Nonstandard shapes, such as rings, discs, and blocks can be economically produced in small quantities with short lead times. Custom parts can be cast-to-size or near-net-shape with relatively inexpensive tooling. Its unique combination of strength, wear resistance, toughness, machinability, and corrosion resistance make TECAST™ cast nylon ideal for bearings, thrust washers, bushings, wear pads, sheaves, rollers, gears, sprockets, and wheels. TECAST™ is commonly used in construction equipment, material handling systems, amusement park rides, pulp and paper processing equipment, steel mills and industrial equipment. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.15 到 1.17 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
1.2 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
23℃ 23℃ |
32 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
188 | ℃ | ASTM D648 |
1.8 MPa,未退火 1.8 MPa, unannealed |
93.3 | ℃ | ASTM D648 |
熔融温度 Melting temperature |
℃ | ASTM D2133 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
最高使用温度 Maximum operating temperature |
|||
Intermittent Intermittent |
℃ | ||
长期 long-term |
℃ | UL 746B | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant 2 |
|||
23 ℃,60 Hz 23 ℃,60 Hz 2 |
ASTM D150 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
屈服,23℃ Yield, 23 ℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 50% RH |
【新闻资讯】查看全部
共抗疫情 奥克集团全面复工
2022-04-10 为了全面打赢疫情防控阻击战,共同迎战疫情应对危机,全面服务和支持生产一线的员工,进一步加强安全生产,尽快恢复集团总部的正常工作,根据辽宁省人民政府《关于做好春节后 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |