公司信息及水印
牌号简介 About |
---|
Casico™ FR4820是一种热塑性、低烟无卤(LSZH)阻燃、紫外线稳定的天然绝缘化合物,具有优异的挤出性能。它是基于一种新型的技术,即含有无机填料的CASICO和一种新型的成炭添加剂,这种添加剂具有阻燃性,且烟雾生成非常有限。当使用挤压实践和试验程序进行加工时,Casico™ FR4820组合符合以下适用要求:EN 50292-2-26 EN 50363-7 TI6 EN 50363-7 TI7 Casico FR4820 is a thermoplastic, low smoke zero halogen (LSZH) flame retardant, UV stabilised, natural insulation compound combining with excellent extrusion properties. It is based on the novel technology, Casico, containing inorganic filler and a novel char-forming additive which confer flame retardancy with very limited smoke generation. Applications Casico FR4820 is designed for: 70°C rated insulation for building wires (installation cables), flexible cords, power cables It can be used in areas sensitive to smoke or corrosive and toxic combustion products. Casico FR4820 is stabilised for use in contact with copper. Specifications Casico FR4820 meets the applicable requirements below using sound commercial extrusion practice and testing procedures: ASTM D 1248 Type I, Class A, Category 4 ISO 1872-PE KGHN-23D006 The following cable material standards are met by Casico FR4820: EN 50290-2-26 EN 50363-7 TI6 & TI7 VDE 0207 Teil 23 (HM2) Special features Casico FR4820 consists of specially selected components to offer: Low smoke and reduced toxic or corrosive gas emissions Excellent processing properties Superb system ageing compatibility Low water permeability UV stabilised and suitable for colouring Processability on most PVC/PE extrusion equipment No need for pre-drying normally |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density 3 |
1.15 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate 3 |
|||
190℃,2.16kg 190℃,2.16kg 3 |
0.90 | g/10min | ISO 1133 |
吸水率 Water absorption rate 4 |
|||
70℃ 70℃ 4 |
0.100 | mg/cm² | IEC 60811-1-3 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness 3 |
|||
邵氏 D,15 秒 Shore D, 15 seconds 3 |
40 | ISO 868 | |
拉伸强度 tensile strength 5 |
|||
屈服 yield 5 |
13.0 | MPa | ISO 527-2/50 |
拉伸应变 Tensile strain 5 |
|||
断裂 fracture 5 |
% | ISO 527-2 | |
弯曲模量 Bending modulus 3 |
MPa | ISO 178 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature 3 |
℃ | ISO 974 | |
低温弯曲 Low temperature bending 5 |
|||
-40℃ -40℃ 5 |
IEC 60811-1-4 | ||
低温冲击 Low temperature shock 5 |
|||
-40℃ -40℃ 5 |
IEC 60811-1-4 | ||
温度指数 Temperature index |
|||
Compound Compound |
℃ | ISO 4589-3 | |
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度的变化率 The rate of change in tensile strength |
IEC 60811-1-2 | ||
-- -- 6 |
% | IEC 60811-1-2 | |
100℃,240 hr 100℃,240 hr |
% | IEC 60811-1-2 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity 3 |
ohms·cm | IEC 60093 | |
介电强度 Dielectric strength |
kV/mm | IEC 60243-1 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
极限氧指数 Extreme oxygen index 3 |
% | ||
NBS烟雾密度 NBS smoke density |
|||
-- -- 7 |
min | ||
-- -- 8 |
|||
-- -- 9 |
min | ||
-- -- 10 |
|||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Breakdown Duration Breakdown Duration 5 |
IEC 60227-2/2.3 | ||
击穿电压 breakdown voltage 5 |
V | ISO 6722 | |
锥形量热试验 Cone calorimetry test |
ISO 5660 | ||
平均热释放速率 Average heat release rate 11 |
kW/m² | ISO 5660 | |
CO CO 11 |
g/cm³ | ISO 5660 | |
CO2 CO2 11 |
g/cm³ | ISO 5660 | |
燃烧热 Combustion heat 12 |
ISO 5660 | ||
点燃时间 Ignition time 11 |
min | ISO 5660 | |
最大热释放速率 Maximum heat release rate 11 |
kW/m² | ISO 5660 | |
Smoke Obscuration Smoke Obscuration 13 |
ISO 5660 | ||
Corrosion(of Combustion Fumes) Corrosion(of Combustion Fumes) 14 |
µS/cm | IEC 60754-2 | |
热压测试 Hot pressing test 15 |
|||
90℃ 90℃ 15 |
% | IEC 60811-3-1 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Compound, ISO 1872-2 |
3 Compound |
4 14 days, Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
5 Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
6 After UV ageing |
7 Time to Dmax, (76x76x0.7 mm plaque), Non-flaming mode |
8 Opitical smoke density Dmax, (76x76x0.7 mm plaque), Flaming mode |
9 Time to Dmax, (76x76x0.7 mm plaque), Flaming mode |
10 Opitical smoke density Dmax, (76x76x0.7 mm plaque), Non-flaming mode |
11 heat flux 35 kW/m2, 3 mm plaque |
12 heat flux 35 kW/m2, 3 mm plaque, MJ/dm3 |
13 heat flux 35 kW/m2, 3 mm plaque, m2/dm3 |
14 Compound, 5.6 |
15 at high temperature, 4 hrs, Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
【新闻资讯】查看全部
惠州石化产业炼化一体化规模跃居全国首位
2018-05-04 5月2日,位于惠州市大亚湾石化区的第二套乙烯裂解装置及其衍生品装置正式投产。中海壳牌化工二期项目11套生产装置的其他关联装置也将在未来几周陆续投产。这一新建120万吨/年乙烯项目投产后,将与“一墙之隔”的中国海油炼油厂(惠州石化)形成深度炼化一体化优势,并与已经建成投产的惠炼一期一起形成2200万吨炼油、220万吨乙烯的年生产能力,惠州石化产业炼化一体化规模也因此跃居全国首位。 随着二期项目的正式投产,国内炼化一体化规模最大、产业高端、绿色安全、配套完善、规范管理,高质量发 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |