牌号简介 About |
---|
聚丙烯共聚物30%矿物填充 Polypropylene, copolymer. 30% mineral filled. |
产品描述 Product Description
颜色:灰色
加工条件:注射成型 Injection Molding
性能特点: 防火阻燃等级HB; 共聚物; Copolymer,HB
填料:矿物 30
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.15 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
20 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
1.1 | % | 内部方法 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
22.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
45 | % | ASTM D638 |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 2 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
相比漏电起痕指数 Compared to the leakage tracing index |
V | IEC 60112 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
1.60 mm 1.60 mm |
UL 94 | ||
3.20 mm 3.20 mm |
UL 94 | ||
灼热丝起燃温度 Igniting temperature of the hot wire |
℃ | IEC 60695-2-13 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 速率 A (50°C/h), 载荷2 (50N) |
【新闻资讯】查看全部
中国联塑再度入围2020胡润中国民营企业500强
2020-11-28 搜料网资讯: 11月25日,胡润研究院发布2020中国500强民营企业榜单,按照企业市值或估值进行排名。 中国联塑企业价值再创新高,以370亿元企业价值再次入围2020胡润中国民营企业500强, |