牌号简介 About |
---|
Cosmic FARBOSET® 1190黑色是一种快速固化、矿物和玻璃填充的环氧树脂模塑料,具有改善的强度性能。它设计用于封装线圈、变压器、开关和其他需要良好抗热震性的电气和电子元件。这种材料具有优异的抗裂性。 Cosmic FARBOSET 1190 Black is a fast curing, mineral & glass filled, epoxy molding compound with improved strength properties. It is designed for the encapsulation of coils, transformers, switches and other electrical and electronic components requiring excellent thermal shock resistance. This material exhibits superior resistance to cracking. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density 2 |
1.91 | g/cm³ | |
表观密度 Apparent density 3 |
1.00 | g/cm³ | |
螺旋流动长度 Spiral flow length |
69.0 | cm | |
收缩率 Shrinkage rate |
|||
MD MD |
0.50 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
32 | J/m | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ||
体积电阻率 Volume resistivity |
ohms·cm | ||
介电强度 Dielectric strength 4 |
|||
3.18 mm 3.18 mm 4 |
kV/mm | ||
介电常数 Dielectric constant |
|||
1 kHz 1 kHz |
|||
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz |
|||
耐电弧性 Arc resistance |
sec | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Loss Factor(1 kHz) Loss Factor(1 kHz) |
|||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
|||
150℃ 150℃ 6 |
hr | ||
150℃ 150℃ |
hr | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
|||
拉伸强度 tensile strength |
MPa | ||
弯曲强度 bending strength |
MPa | ||
压缩强度 compressive strength |
MPa | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ||
导热系数 Thermal conductivity coefficient |
W/m/K | ||
最高工作温度 Maximum operating temperature |
|||
Intermittent Intermittent |
℃ | ||
贮藏期限 Storage period 5 |
|||
5℃ 5℃ |
wk | ||
25℃ 25℃ |
wk | ||
35℃ 35℃ |
wk |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Molded |
3 Powder |
4 方法A(短时间) |
5 Defined as not more than 40% loss of spiral flow based on original values. |
6 Hot Plate Cure Time |
【新闻资讯】查看全部 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |