| 牌号简介 About |
|---|
| Bormed™ HG820MO-11是一种用于医疗应用评估的树脂。Bormed HG820Mo是一种澄清的均聚物，通常用于注塑成型。添加已优化，以提供良好的脱模性能。该聚合物为CR（受控流变学）级，分子量分布窄，翘曲风险低。BORMED HG820MO可以用环氧乙烷或蒸汽灭菌。已根据不同的法规和规范对应用程序Bormed™ HG820MO-11进行了评估。以下介绍了医疗器械或药物和诊断包装的典型应用。但是，应咨询Borealis以获得最终批准，以评估Bormed™ HG820MO-11的使用。一次性非预充注射器实验室一次性使用本等级的注射器只能用于产品数据表中列出的应用，并且仅限于应用在符合该等级医疗使用规定声明中规定的测试范围内。如果产品数据表中未列出申请，则只有在获得医疗保健部门Borealis营销经理的明确书面同意后，才能使用该等级。Borealis禁止在植入装置中使用任何医疗级产品，植入装置通过外科手术引入人体，并在外科手术后保持原位。特殊功能，易于处理，透明度好 Bormed HG820MO-11 is a resin intended for evaluation for use in Healthcare applications. Bormed HG820MO is a clarified homopolymer and typically used in injection moulding. Additivation has been optimized to provide good demoulding properties. This polymer is a CR (controlled rheology) grade with narrow molecular weight distribution giving low risk of warpage. Bormed HG820MO can be sterilised with ethylene oxide or steam. Applications Bormed HG820MO-11 has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed HG820MO-11 . Disposable non pre-filled syringes Laboratory disposable This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special Features Easy processing Good transparency |
产品描述 Product Description
用途：实验室器具;
加工条件：注射成型 Injection Molding
性能特点： 可回收; 可控流变; 含脱模剂; 蒸汽消毒; 一次性用品; 均聚物; 低翘曲性; 窄分子量分布; 透光性好; 环氧乙烷消毒; 易加工; Low warping,Excellent Processability,Good Clarity,Steam sterilized,Renewable resources,Controllable rheological,Good stripping performance,Disposable,Weight distribution,Ethylene oxide disinfection,Homopolymer
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
0.905 | g/cm³ | ISO 1183 |
|
熔体质量流动速率 Melt Flow Rate |
|||
|
230℃，2.16kg 230℃，2.16kg |
28 | g/10min | ISO 1133 |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
拉伸模量 Tensile modulus |
1900 | MPa | ISO 527-2/50 |
|
拉伸强度 tensile strength |
|||
|
屈服 yield |
40.0 | MPa | ISO 527-2/50 |
|
拉伸应变 Tensile strain |
|||
|
屈服 yield |
7.0 | % | ISO 527-2/50 |
|
弯曲模量 Bending modulus 2 |
MPa | ISO 178 | |
|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
|
23℃ 23℃ |
kJ/m² | ISO 179/1eA | |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
热变形温度 Hot deformation temperature |
|||
|
0.45 MPa，未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/Bf | |
| 备注 |
|---|
| 2、50 mm/min |
|
【新闻资讯】查看全部 
扬子乙烯裂解炉 节能改造项目投产
2022-01-18 搜料网资讯： 2021年12月30日，扬子石化烯烃厂乙烯联合装置裂解炉节能改造项目建成投产，投料开车一次成功。 本次改造采用中国石化自有技术，主要对裂解炉炉管、废热锅炉等进行节 |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。 |
当前牌号已加入对比
支付宝
微信支付