牌号简介 About |
---|
CONATHANE® CE-1155-35是一种双组分、高性能、溶剂型聚氨酯涂层系统,用于在恶劣环境中保护电路组件。Ca 1155 CE 35提供固体35%,主要用于喷涂应用。可通过浸渍进行施涂,但可能需要两层或两层以上的涂层,以获得推荐的1.5至2密耳的膜厚。 CONATHANE CE-1155-35 is a two-component, high-performance, solvent-based polyurethane coating system for protecting circuit assemblies in adverse environments. CONATHANE CE 1155 35 is supplied at 35% solids and is primarily intended for spray applications. Application can be made by dipping, however two or more coats may be required to obtain a recommended film thickness of 1.5 to 2 mils. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
-- -- 2 |
0.928 | g/cm³ | |
-- -- 3 |
1.05 | g/cm³ | |
固体含量 Solid content |
|||
Hardener Hardener |
30 | % | |
Resin Resin |
37 | % | |
粘度 viscosity |
Brookfield | ||
固化剂,25℃ Curing agent, 25 ℃ |
0.02 | Pa·s | Brookfield |
树脂,25℃ Resin, 25 ℃ |
Pa·s | Brookfield | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ||
体积电阻率 Volume resistivity |
|||
25 ℃ 25 ℃ |
ohms·cm | ||
介电常数 Dielectric constant |
|||
25 ℃,1 MHz 25 ℃,1 MHz |
|||
耗散因数 Dissipation factor |
|||
25℃,1 MHz 25℃,1 MHz |
|||
绝缘电阻 insulation resistance |
|||
25℃ 25℃ |
ohms | ||
击穿电压 breakdown voltage |
V | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
闪点 flash point |
|||
Hardener Hardener |
℃ | ||
Resin Resin |
℃ | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
储存稳定性 storage stability |
|||
25 ℃ 25 ℃ |
min | ||
贮藏期限 Storage period |
|||
25℃ 25℃ |
wk | ||
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ |
cP | ||
脱模时间 stripping time |
|||
25℃ 25℃ |
min | ||
60℃ 60℃ |
min | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Moisture Resistance(10th cycle @ 65℃,98% R.H.) Moisture Resistance(10th cycle @ 65℃,98% R.H.) |
ohms | ||
抗真菌性 Antifungal activity |
ASTM G21 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Hardener |
3 Resin |
【新闻资讯】查看全部
外卖井喷!天量“用塑”拷问“限塑”
2017-09-19 2008年,国务院发布“限塑令”:从2008年6月1日起,在全国范围内禁止生产、销售、使用厚度小于0.025毫米的塑料购物袋,所有超市、商场、集贸市场等商品零售场所一律不得免费提供塑料购物袋。 然而,半月谈记者在上海、广东、吉林、湖南等地调研发现,已施行九年的“限塑令”效果堪忧,情况不容乐观。“要袋子吗?大袋三角,小袋两角。”这是许多超市收银员面对结账顾客的“开场白”;“要一个”,也是许多顾客自然而然的回答。 免费塑料袋仍在普遍使用 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |