牌号简介 About |
---|
EPIC R1074/H4030-01是一种高级阻燃环氧灌封化合物,具有通过UL 94 V-0认证的UL黄牌。在这种火焰等级下,R1074/H4030-01的温度等级为90摄氏度。R1074/H4030-01目前正用于-40摄氏度和85摄氏度之间的热循环应用中,但没有问题。R1074/H4030-01还具有较长的使用寿命和方便的1:1配合比。 Epic R1074/H4030-01 is a premium fire retardant epoxy potting compound that carries a UL yellow card approved to pass UL 94 V-0. With this flame rating R1074/H4030-01 carries a temperature rating of 90C. R1074/H4030-01 is currently being used in applications that are thermal cycled between -40C and 85C without issue. R1074/H4030-01 also features a long work life and convenient 1:1 mix ratio. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.45 到 1.50 | g/cm³ | ASTM D792 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,25℃ Shaw's D, 25 ℃ |
78 到 82 | ASTM D2240 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
3.1E+13 到 3.5E+13 | ohms·cm | ASTM D257 |
介电强度 Dielectric strength |
|||
3.18 mm 3.18 mm |
18 到 19 | kV/mm | ASTM D149 |
介电常数 Dielectric constant |
|||
100 kHz 100 kHz |
4.22 到 4.66 | ASTM D2520 | |
耗散因数 Dissipation factor |
|||
100 kHz 100 kHz |
ASTM D150 | ||
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ |
cP | ASTM D2393 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature |
℃ | ASTM E1356 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
储存稳定性 storage stability 2 |
|||
25 ℃ 25 ℃ 2 |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 100 Gram Mass |
【新闻资讯】查看全部
研究人员开发了一种涂层,可以在30分钟的光照下修复汽车划痕
2022-08-11 在汽车上发现划痕是一件特别令人心碎的事,但在未来,它们可能在你找到它们之前就消失了。韩国科学家开发了一种涂层,当暴露在阳光下时,这种涂层可以在30分钟内自我修复划痕 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |