公司信息及水印
牌号简介 About |
---|
Prime ABS 750是一种通用的ABS产品,具有良好的冲击强度和热成型热强度。它是一种无定形热塑性材料,因此比其他热塑性材料更容易加工。应用:Prime ABS 750可用于内部应用,如电器零件、浴缸和淋浴墙周围以及汽车内饰。加上一个耐候帽,它也可以在许多户外应用中使用。加工:Prime ABS 750由于其特殊的热强度,很容易热成型。它可以在木头、环氧树脂、陶瓷或铝工具上形成。成型温度范围为300-350°F。为了达到最佳效果,模具温度应为150-190°F。在某些情况下,成型前必须干燥板材。精加工:用Prime ABS 750制造的零件可以用机械螺钉、螺栓、螺母、铆钉和弹簧钢紧固件连接。螺纹切削或螺纹成型螺钉是固定单独接头的经济方法。如果不需要最大冲击强度,成形零件可与二氯甲烷连接。也可以使用冲压和快速焊接技术和声波焊接来连接Prime ABS 750。请与Primex塑料公司代表联系,了解有关表面处理、制造或热成型工艺的更多信息。颜色、纹理、功能:Prime ABS 750可根据您的具体要求进行颜色匹配。Prime ABS 750的厚度从.030到.400不等。纹理包括:小牛纹、HC、RM、塞维利亚、Levant I、FL/HC和菱形板。 Prime ABS 750 Is a general purpose ABS product that has good impact strength, and good hot strength for thermoforming. It is an amorphous thermoplastic material and therefore, processes easier than some other thermoplastic materials. Applications: Prime ABS 750 may be used for interior applications such as appliance parts, tub and shower wall surrounds, and interior automotive trim. With the addition of a weatherable cap it may also be used in many outdoor applications. Processing: Prime ABS 750 is rather easy to thermoform due to its exceptional hot strength. It can be formed on wood, epoxy, ceramic and or aluminum tools. The forming temperature has a range of 300 -350°F. For best results the mold temperature should be 150-190°F. In some cases it is necessary to dry the sheet before forming. Finishing: Parts made with Prime ABS 750 may be joined with machine screws, bolts, nuts, rivets, and spring steel fasteners. Thread cutting or thread-forming screws is an economical means of securing separate joints. Formed parts may be joined with Methylene Chloride if maximum impact strength is not required. Press and snap techniques and sonic welding may also be used for the bonding of Prime ABS 750. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures, Capabilities: Prime ABS 750 can be color matched to meet your specific requirements. Prime ABS 750 is available in Thicknesses from .030 - .400. Textures include; Calf Grain, HC, RM, Seville, Levant I, FL/HC and Diamond Plate. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.04 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,3.80kg 230℃,3.80kg |
1.7 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
-40℃ -40℃ |
120 | J/m | ASTM D256 |
23℃ 23℃ |
340 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,退火 0.45 MPa, annealed |
92.2 | ℃ | ASTM D648 |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
> 1.27 mm > 1.27 mm |
FMVSS 302 | ||
0.76 mm 0.76 mm 2 |
UL 94 | ||
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
光泽度 gloss |
|||
60° 60° |
ASTM D523 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热成型模具温度 Temperature of hot forming mold |
|||
Forming Temperature Forming Temperature |
℃ | ||
模具温度 Mold temperature |
℃ | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 >0.03 in |
【新闻资讯】查看全部
Pearl聚氨酯公司打算在新的5年扩张计划中将规模扩大一倍
2021-08-18 搜料网资讯: 新独立的公司--Pearl聚氨酯公司是一家覆盖中东和北非地区的领先材料公司,计划在未来五年内将其规模扩大一倍,并在国际上进行扩张。 总部位于迪拜的Pearl聚氨酯公司( |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |