牌号简介 About |
---|
CP100是丙烯和乙烯的异相共聚物。该牌号具有较高的熔体流动速率和很高的刚度。它是为具有复杂设计的零件开发的,允许快速循环注射薄壁零件和优良的感官性能。应用:大体积零件的注射,复杂或薄壁设计,化合物。加工:注塑 CP 100 is a heterophasic copolymer of propylene and ethylene. This grade has high melt flow rate and very high stiffness. It was developed for parts with complex design and it allows fast cycles injection of thin-walled parts and excellent organoleptic properties. Applications: Injection of large volume parts, complex or thin walled design, compounds. Processing: Injection Molding |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
100 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
-20℃,注塑成型 -20 ℃, injection molding |
20 | J/m | |
23℃,注塑成型 23 ℃, injection molding |
30 | J/m | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火,注塑成型 0.45 MPa, unannealed, injection molded |
115 | ℃ | |
1.8 MPa,未退火,注塑 1.8 MPa, unannealed, injection molded |
℃ | ||
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 2 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength |
|||
屈服,注塑成型 Yield, injection molding |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
屈服,注塑成型 Yield, injection molding |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
1% 正割,注塑成型 1% cut, injection molding |
MPa | ASTM D790 |
备注 |
---|
2. 压 力1 (10N) |
【新闻资讯】查看全部
到2025年中国计划建成500个以上智能制造示范工厂
2022-01-05 搜料网资讯: 中国工业和信息化部等八部门联合印发的《十四五智能制造发展规划》提出,到2025年,70%的规模以上制造业企业基本实现数字化网络化,建成500个以上引领行业发展的智能 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |